> Care to guess how many boards can sit in a warehouse for many years and still have good capacitors.
If you guys are having trouble storing boards for 10+ years with caps regularly going bad, I would highly recommend you look into a new supplier. Well-built caps should have no problem going for 25+ years in storage (especially cold).
In addition, this is probably the easiest component on the board to replace. If you can’t find functional new stock and this is the only issue, just recap them.
I have no insight into how we store things. I sometimes have input into the buy or port to a replacement decision, but if we decide to buy there is a completely different department that handles the details.
Caps are an issue that is easiest for people here to understand, but we have a long list of similar issues to watch for in storing parts
Or ditch electrolytic and tantalum caps wherever possible because they're crap. It's often possible to engineer a more expensive, reliable LR circuit for the impedance of a cheap RC one.
Tantalum have their own issues. Yes, they live longer. But they're nice little fire starters and are much more critical than electrolytic capacitors when it comes to voltage tolerance.
It's kind of amazing to me that we can build 3nm chips but we still haven't figured out how to build a uF-range cap that has long MTBF, good overvoltage tolerance, low series resistance, and doesn't blow up.
Indeed. But... caps are improving, but slowly. The size difference between say a 100 uf 25V cap today compared to one from the 80's is considerable, and if you add another decade it is hard to believe it is the same component.
By contrast inductors have not changed in size at all and resistors are very much limited by power dissipation.
If you guys are having trouble storing boards for 10+ years with caps regularly going bad, I would highly recommend you look into a new supplier. Well-built caps should have no problem going for 25+ years in storage (especially cold).
In addition, this is probably the easiest component on the board to replace. If you can’t find functional new stock and this is the only issue, just recap them.