The first computer I had was an 8088 XT clone with a turbo setting that went from 4.77 MHz to 8 MHz! It was blazing fast!
I remember the very first thing I did when we brought the computer home from the computer store was I went through the hard drive and saw this file that I couldn't possibly use, and deleted it. Why? Who knows, I was a dumb kid.
Yes, you guessed it. COMMAND.COM.
When I rebooted my computer, I got the "COULD NOT LOAD COMMAND.COM" error and I freaked out because I f'ed up my computer on the very first day I had it and my parents would kill me. I knew I could boot from my DOS 3.2.1 diskettes, but not from my hard drive, so after straining, I somehow managed to figure out how to copy the command.com from my diskette onto my hard drive and it worked.
And thus started my illustrious career in debugging computer problems and IT support, which continues to this day.
Have some similar memories myself. Definitely learned a lot from being a little too enthusiastic about modifying files/settings on the family computer.
What stands out for me is the period when I was still just a kid, albeit the "neighborhood computer kid". I'd inevitably get a call every few weeks from someone who lived nearby or was a friend of my parents. I'd go over, almost always figure out the problem and then they would ask "How did you know to do that?". I'd explain what happened best I could, but I'd be thinking to myself, "How did I know to do that? Well, I didn't until now."
Also, it was pretty cool at 11 years old to discover that I could make money just by working on my own to help other people folks fix problems and didn't necessarily need a "real" job.
Heh, I used to do that with all the binaries I could find in an attempt to learn their secrets (before I discovered I could do it with DEBUG.COM). I found that doing "copy command.com /b con" would show me more since it would stop on EOF characters.
A little update - I've now replaced the power supply's circuit board with one from a modern (and working) ATX PSU, the graphics card with a CGA card (which works with the TV with the BIOS timings) and booted into ROM BASIC using a little Windows program to turn keystrokes into scancodes sent over the serial port.
The hard drive doesn't appear to be bootable and I don't have any floppy disks for it yet so I need to write some more code to see if the hard disk is broken or just doesn't have a boot sector, and to determine which RAM chip is faulty (it's only detecting 192Kb of the 256Kb onboard RAM).
Check your inbox ... as far as monitors go, my first one was a NEC Multi-Sync EGA monitor that had the pin-out you need. It was top-of-the-line but cost $650 for a 640x350 16-color display. And it was heavy! I believe I sent it to our local recycler last year, but I wanted to point out that there are VGA-EGA adapters packaged much like RS-232 (serial) gender changers ... if I can find the appropriate one, I'll send it along with your keyboard.
In case you don't know, a 9 pin serial port looks like a CGA port. I distinctly remember learning that the hard way as white smoke poured out of the power supply :)
It doesn't look like a CGA port ... the serial port is male and the CGA port is female (as are early VGA ports as well as the Hercules Monochrome port). Some of the XT's had DB-25 serial ports (the DB-9 serial ports were introducted with the AT) DB-25 parallel ports (so you could drive your Centronics printer).
These machines are so old they don't even have a real time clock, let alone any CMOS RAM on the motherboard. You change the BIOS settings by flipping physical switches, and DOS would prompt you to set the time and date on every boot!
This particular machine does have a clock on a "Tecmar Captain 200044" expansion board - if you have a manual or software for that I'd be very interested. I've found no information about it on the internet (other than people selling them, so it must have been fairly popular at one point).
I love to see this level of investigation. It's a great shame that there's not really any programme of funding or support to encourage hacking like this. Hopefully people will dig around in cupboards / attics / basements to find more hardware.
You can still get the large 5pin din connecting keyboards on ebay. Search for "G83-6414" for example.
But I think the 5pin to ps/2 connector may just be a straight wire through to the smaller connector, so you can reverse that?
Threw out turbo-xt motherboards well over a decade ago.
Still have a couple 16mhz 386sx motherboards somewhere that I cannot seem to make myself throw out because they worked fine, just (very, very) outdated. They are so tiny (1/3 board size) that they don't take any space to keep around.
Also have some isa vga cards somewhere - could send you one if you really needed. But the original XT also had an optional color card with composite out that could still be easily used today.
My memory is that the AT (and PS/2) keyboards shared the same signaling, but had different scan codes. So it wouldn't work to plug a PS/2 keyboard in via a DIY adapter.
That was my first thought too, and I made up serial and parallel cables. But without a keyboard or disk drives, there's no way to bootstrap it into running some software that will talk to the serial or parallel port.
Ah, but there is. As one of the commenters on the site noted, you make a floppy with the redirection command in "autoexec.bat". Of course, I only have a 3.5 inch USB floppy drive, but not a way to work on 5.25 inch floppies (no sure if spare drive in garage still plugs into anything in newer mobos)
The first computer I had was an 8088 XT clone with a turbo setting that went from 4.77 MHz to 8 MHz! It was blazing fast!
I remember the very first thing I did when we brought the computer home from the computer store was I went through the hard drive and saw this file that I couldn't possibly use, and deleted it. Why? Who knows, I was a dumb kid.
Yes, you guessed it. COMMAND.COM.
When I rebooted my computer, I got the "COULD NOT LOAD COMMAND.COM" error and I freaked out because I f'ed up my computer on the very first day I had it and my parents would kill me. I knew I could boot from my DOS 3.2.1 diskettes, but not from my hard drive, so after straining, I somehow managed to figure out how to copy the command.com from my diskette onto my hard drive and it worked.
And thus started my illustrious career in debugging computer problems and IT support, which continues to this day.