Hacker News new | past | comments | ask | show | jobs | submit login
Why Are Politicians So Obsessed with Manufacturing? (nytimes.com)
193 points by petethomas on Oct 5, 2016 | hide | past | favorite | 254 comments



Manufacturing is a target because it's easy for people to see concrete results. They can point at something and say, "we made that", and it tends to generate some sense of pride. The same doesn't really apply for service industries or innovation in the service industries: "we produced consumer surplus by lowering transportation costs via automation" doesn't roll off the tongue as well. :)

The same problem exists for creating software. Massive software projects tend to be unimpressive to people not familiar with the IT industry because they don't comprehend the scale or fundamental difficulties in computer science that were overcome to accomplish something.

Compare airplanes and wifi on airplanes. Most people are impressed by an A380, but they couldn't give two shits about the incredible technology behind offering wifi 5 miles above the Atlantic ocean at 700MPH ground speed. They just trivialize it by saying, "yeah, it comes from that little radio".


Manufacturing also provides jobs for both high and low skill workers. As such can be seen as more valuable to a community than say, a software company that only hires engineers and a CS center in a different state. Manufacturing was one of the best roads for a low skill worker to earn good money and move up the rung economically - something that only seems to be getting harder as time goes on.


You make a very important point with regards to manufacturing providing jobs for both high and low skill workers. I would add that it can also be a very good way to go from being a low skill worker to becoming a high skill worker on the job, meaning that you are being paid while improving your skills. If you're already poor and don't have any particular skills, it can be extremely difficult to improve upon your situation while trying to make enough money to survive. Many times additional schooling, either at the college/university or trade school/community college level, are out of reach, or at least made much more difficult, once you've already worked a 40-50 hour week.

I work as a technician in aerospace and when I started I had zero experience in this type of manufacturing environment. If I hadn't gotten the opportunity to improve upon my skills while on the job I would most likely still be stuck in a much lower paid and less satisfactory low end retail or service job.


Definitely, the on-the-job training aspect of a manufacturing job is huge, and there's just so much knowledge that's hard to pass on in a set of standards and best practices. Agreed on all points about skill development & continued education when you're poor. It strikes me as one of the harder problems to fix when it comes to mobility/inequality as the economy changes.

You sound a lot like me professionally haha. I had the same level of experience when I started at the EMS provider I'm with, just doing CAD library stuff and learning as much as I could when requests were light. Graduated to helping out with bits of full board designs like routing/placement, then graduated to full boards eventually. Having both a design team and SMT lines in the back to learn from is invaluable experience that's hard to recreate.


It may seem to be getting harder, but in reality it's not. Rank based measures of mobility are stable. Since income inequality is up, absolute mobility has also increased.

https://eml.berkeley.edu/~saez/chettyetalAERPP2014.pdf


Interesting paper. It actually concludes that reasonable seeming (IMO) definitions of mobility give different results on the question of whether mobility has increased or decreased (or stayed the same) since the 70s.

"Based on all of these measures, we find that children entering the labor market today have the same chances of moving up in the income distribution (relative to their parents) as children born in the 1970s.

"Although these rank-based measures of mobility have remained stable, income inequality increased over time in our sample, consistent with prior work. Hence, the consequences of the "birth lottery"---the parents to whom a child is born---are larger today than in the past. A useful visual analogy is to envision the income distribution as a ladder, with each percentile representing a different rung. The rungs of the ladder have grown further apart (inequality has increased), but children’s chances of climbing from lower to higher rungs have not changed (rank-based mobility has remained stable).

...

"Together, these two facts can be used to construct various measures of mobility. For example, if one defines mobility based on relative positions in the income distribution---e.g., a child’s prospects of rising from the bottom to the top quintile---then intergenerational mobility has remained unchanged in recent decades. If instead one defines mobility based on the probability that a child from a low-income family (e.g., the bottom 20 percent) reaches a fixed upper-income threshold (e.g., $100,000), then mobility has increased because of the increase in inequality. However, the increase in inequality has also magnified the difference in expected incomes between children born to low- (e.g., bottom-quintile) versus high- (top-quintile) income families. In this sense, mobility has fallen because a child’s income depends more heavily on her parents’ position in the income distribution today than in the past."


"When compared to 24 middle-income and high income countries, the U.S. ranks 16th in the amount of inter-generational earnings mobility. The relatively low level of mobility in the U.S. may arise in part because low-income children in the U.S. tend to have less stable and lower-income families, less secure families, and parents who have less time to devote to their children."

http://inequality.stanford.edu/sites/default/files/Pathways-...


The numbers you quote do not address the point under discussion at all.


"However, the increase in inequality has also magnified the difference in expected incomes between children born to low-(e.g., bottom-quintile) versus high-(top-quintile) income families. In this sense, mobility has fallen because a child’s income depends more heavily on her parents’ position in the income distribution today than in the past.

Since the appropriate definition of inter-generational mobility depends upon one’s normative objective, we characterize the copula and marginal distributions separately in this paper."

It would appear we have different normative objectives.


No, the result of increased wealth inequality, even if you maintained the same level of social mobility, will worsen not improve situation. The description of a rise in absolute mobility would be a misunderstanding of the issue.

If that is too theoretic, consider the analogy of a lottery where one group of children win automatically and an other group has say a 10% chance of winning during their life. Increasing the prize (i.e. a rise in inequity among classes) serves only to worsens the situation not only for the median and average members but the vast bulk of the lower class since those who don't rise (the vast majority) are now even worse off relatively.

Or indeed by your logic simply raising the salary of a CEO by a massive amount also raises the "absolute mobility" of all other employees

So unless mobility also raises by at least a corresponding amount, any worsening of inequality at birth will only worsen the situation by every meaningful standard. And even then it is probably a bad idea.


Or indeed by your logic simply raising the salary of a CEO by a massive amount also raises the "absolute mobility" of all other employees

Yes. If I had a 1% chance of being the CEO and having my income go from $100k to $1M, my expected payoff was $900k x 1% = $9k. If my income stays at $100k but the CEO income goes to $10M, and my odds of being the CEO stay at 1%, my expected payoff is $9.9M x 1% = 99k.

My situation has not been worsened and has a possibility of being improved.

You seem to think it somehow makes me worse off if my CEO makes more money. Can you explain? Note that I'm not a person prone to envy.


Or by that logic you could cut your pay from $100K to $1K and give your CEO $10M and be just as happy. There are plenty of people who live on $1K a year after all.

Although in the CEO's case, often no further harm is done, if half of a population has a massive increase in wealth while the other half does not then then poorer half must compete for limited resources with a group that will not only drive prices up but can now purchase assets as a form of rent seeking. So in fact, greater inequality acts as currency devaluation for the disadvantaged group.

The CEO example was not meant to cause unjustified envy but to show that according to your logic, instead of ever giving employees a raise you could simply give all raises to the CEO and tell employees that by cost benefit analysis the effect is the same, that they are better off.

To put it concretely, from now on, every time you ask for a raise just ask that your boss get that extra compensation instead. I think you will find the effect is not remotely the same.

Or from now on, ask for all of your pay check that exceeds poverty line for chances at a completely fair trillion dollar lottery.

Simple cost benefit multiplication is being erroneously applied in these cases (and often is)


if half of a population has a massive increase in wealth while the other half does not then then poorer half must compete for limited resources

You are not discussing an increase in wealth at all. You are discussing a situation of declining or fixed wealth and monetary inflation. They aren't the same thing.

I agree that we should try to avoid declines in wealth. Luckily wealth has only increased in the US and globally, for folks at the bottom and the top.

Everything I said is unchanged if you replace income with utility(income).


No it does not. If you received no utility for your work but instead a 1:1000,000 chance of a million incomes, you would starve to death. The math you are using does not describe reality and rational people, since about Galileo anyway, have known better than to insist on broken models.

There is a reason people are willing to buy $1 lottery tickets but not $1000 tickets. (hint: a certainty of misery or high chance of death is not compensated by a remote chance of enormous wealth of ever decreasing marginal utility)

You are simply misunderstanding the use cost benefit, I assume because it clashes with some ideological point.

But if you want to buy a one in a million chance for a trillion dollars, I have a bitcoin address you could send a million bucks too.


The math you are using does not describe reality and rational people, since about Galileo anyway, have known better than to insist on broken models.

First of all, it's a textbook exercise in topology to show that any rational decision process must have a utility function (at least for a countably infinite set of choices).

Let me repeat the statement for utility functions. Suppose I have a 1% chance of being CEO and increasing my utility to U(CEO pay) - U(my pay). Suppose this increases to U(10x CEO pay) - U(my pay).

It's simple arithmetic that 0.01 x U(10X CEO pay) + 0.99 x U(my pay) > 0.01 x U(CEO pay) + 0.99 x U(my pay).

Rearranging the arithmetic, this is merely the statement that U(10X CEO pay) > U(CEO pay) - i.e. I'll be happier as a CEO with 10M than with 1M. Do you disagree with this statement?


You are using high school math incorrectly which is what results in the many obvious contractions I have listed above.

In the unlikely event you are actually interested in the correct formulation, you start to find the answer here [1].

[1] https://en.wikipedia.org/wiki/Marginal_utility#Quantified_ma...


Then again, software is one of the few industries where you can do quite well without a formal degree or license.

This makes it unusually open to the uncredentialed, if not the unskilled.


Define "unskilled". I would say that even if software developer does not have a degree he or she still needs to be quite smart.

Now imagine typical blue collar worker having IQ below 100, who dropped from high school (as they often do) learning advanced technical concepts like network protocols, dozen of JS frameworks, not to mention higher order functions and macros.

That's the issue with technical advancements: there are more and more jobs for people with high IQ and vast knowledge, and less and less jobs for people who can only work with their muscles, not brains.


> Now imagine typical blue collar worker having IQ below 100

I, quite honestly, really struggle to imagine this person. As someone involved in the agriculture industry, I see a lot of blue collar people. They all seem quite intelligent and capable to me. Some I could consider absolute geniuses. Save a small group who have real crippling disabilities, I'm not sure I have ever met a person who I think would struggle with those technical concepts.

It's a time commitment, for sure, but not a particularly difficult undertaking. What I have observed over the years are numerous people who think that this kind of technical work would be an awful way to make a living. That's the real barrier to entry. It is difficult to put in the necessary time when you get absolutely no enjoyment out of it, as difficult as that is for me – and I expect everyone else around here – to understand.

Or maybe I've just lived a sheltered life. The high school completion rate where I live is about 90%, so these people who you say can be identified as high school dropouts are not particularly common to begin with.


This. I've worked with plenty of smart uneducated people. In the army and various industries I've been around (trucking, manufacturing) there are plenty of knuckleheads but also a surprising number of very smart people for whom the education system either wasn't a fit or an option.


Not all "Blue" collar jobs are unskilled and some do require intelligence for example an experienced machinist or technician may know as much if not more than the "Profesional"


But even there the trend is towards making the "blue collar" machinist a mere button pusher & tool bit changer while the machining process is planned and the machine programmed elsewhere. Perhaps by a former machinist now sitting in an office. I can only imagine it going more and more in this direction with improved CAD & CAM tools that enable people without any machining experience to program the machines. I don't have a problem with this development.

It can be quite a depressing sight to take a tour at the machine shop floor where machinists sit next to their CNC machines, maybe wiping coolant off of pieces and putting them in boxes, maybe just reading a comic..


> I would say that even if software developer does not have a degree he or she still needs to be quite smart.

Agreed. That's what I meant by "if not the unskilled"


I've seen many people work their way up within IT from help desk to sysadmin to ops to management to CIO. Some successfully transition into development. Manufacturing doesn't have the monopoly on on-the-job skill-driven mobility.


Manufacturing is more open to a broader set of candidates than IT. Want to point out the part where I say mfg has a monopoly on on the job training?


What is even more troubling is the amount of people who seem to believe that such people do not deserve a decent pay.


> "we produced consumer surplus by lowering transportation costs via automation" doesn't roll off the tongue as well. :)

Yeah, but "check out our shiny robot trucks" seems to be an acceptable brag these days. :)


Last week's NYT article on free trade was pretty good: http://www.nytimes.com/2016/09/29/business/economy/more-weal...

This is the bottom line on American manufacturing:

> From 2000 to 2010, the United States lost some 5.6 million manufacturing jobs, by the government’s calculation. Only 13 percent of those job losses can be explained by trade, according to an analysis by the Center for Business and Economic Research at Ball State University in Indiana. The rest were casualties of automation or the result of tweaks to factory operations that enabled more production with less labor.

> American factories produced more goods last year than ever, by many indications. Yet they did so while employing about 12.3 million workers — roughly the same number as in 2009, when production was roughly three-fourths what it is today.

Most of the jobs that left are never coming back. They didn't go to Mexico or China; they simply disappeared because automation and productivity increases rendered them unnecessary.

If the US sheltered its manufacturing sector from foreign competition, a small number of jobs might come back, but the increased cost of manufacturing things in the US would strongly incentivize companies to automate those jobs away as quickly as possible.

Manufacturing has a powerful political resonance, both in terms of the imagery of hardworking middle-class factory workers and national pride, e.g. "Why don't we make things in this country anymore?" However, I suspect that most politicians who talk about a manufacturing revival understand that it won't really happen.


>However, I suspect that most politicians who talk about a manufacturing revival understand that it won't really happen.

The thought that maybe some of them don't understand that is what scares me the most.


The worst aspect of politicians is you can never differentiate between what they pay lip service to and what they truly believe.


So, just like everyone else, basically...


But there aren't a finite number of factories. If more factory work gets automated, then it will reduce the cost of building more factories and producing even more goods.

Whereas service jobs seem more finite. There is only a finite demand for burgers or shelf stockers, unless you increase the population. I really don't understand how a mostly service based economy is sustainable.

In any case, the service based jobs are just as vulnerable to automation. There are already a number of prototype burger making robots, for instance.


> unless you increase the population.

That doesn't help either. If you are increasing population without that population having wealth (and generally the wealthier you are the fewer kids you have) you dilute the distributed wealth of the poor to the point where they no longer have the economic influence to warrant hiring shelf stockers or burger flippers because they have no money.

> There are already a number of prototype burger making robots, for instance.

The automation of service is not coming in the form of robots doing a service workers job, its computers obsoleting the service. It is the same thing trying to make the "perfect" veggie burger vs learning to love naturally vegan dishes.

It is companies like Amazon that are displacing service workers by the thousands. There is so much potential revenue to be made and costs to be saved by having a wholly automated supply chain, and eventually you are having your burgers air dropped on demand by drone rather than having to go anywhere in a self driving taxi to get the burger. The logistics of service will... are... changing fundamentally, constantly, every day, progressing towards those eventualities.

It is not a problem tax rates or "American grit" solve. It requires a rethinking of your economic system when you finally accept reality that swathes of productive gains are not being made by the sweat of a single human being, at which point the fruits of those labors are no longer compatible with traditional laissez faire capitalism.


There's a finite demand for manufactured goods too. If anything, the price elasticity for manufactured goods seems likely to be lesser than that for restaurant meals; I'd eat out more often if it cost less, but I'm not going to buy additional dishwashers or dining tables for my house no matter how cheap they get. I'm not going to buy light bulbs or printers faster than they need replacement due to failure. With laser printers and LED bulbs, that can be several years between purchases.


You're correct that manufacturing too has a finite demand but it still has an order of magnitude more potential than the service industry. The vast majority of service jobs are extremely local or tied to a language/region/jurisdiction so those jobs have very little to export. Meanwhile, the vast majority of the world is not yet affluent enough to afford most luxury manufactured goods so as the population gets wealthier, the market for manufactured goods expands. As long as the developing world follows western consumerism, and by all vounts it looks like it is, there is a lot of room to grow. Developed countries who have centuries of industrialization behind them and a knowledge economy stand a much greater chance of capturing that newly generated wealth because of scale and experience. As long as higher labor and regulatory costs can be offset by automation, the manufacturing can be grown with the world while services can only really grow with the national population.


I see a lot of growth potential for manufactured goods if you measure them in mass. I'm not sure there's great growth potential if you measure them in money. Every wave of industrial relocation so far has overtopped the previous one by lowering costs. China's steelmakers are exporting more tonnes of steel than US steelmakers did 50 years ago, but they're also commanding significantly less money per tonne. For that matter, if poor countries are going to get wealthier but buy manufactured goods from abroad, where is their new wealth coming from if not manufacturing or services?


You have an over-narrow concept of 'services'. A large part of 'service' wealth creation happens in management of supply chains (import/export, sales, marketing, logistics, right down to shelf stacking and warehouse workers) which scale alongside industrial demand, not population. Overseas manufacturers can't access markets at all without effectively paying service providers to help them distribute their goods. Walmart is, in a way, an exporter of market access services.

That's even before you consider service industries that create intellectual property which scale with global laziness and boredom, or the finance industry which provides services that scale with global economic activity, rather than local population.


Perhaps you wouldn't, but I do know people who regularly change out all their furniture and appliances for newer models that have more bells and whistles and/or are more "fashionable".

Would they do it every single year if the furniture and appliances got cheap enough? IMO, yes.


I would argue this is done more as a psychological status symbol. If goods such as furniture and appliances are so cheap that your "average joe" can buy the latest appliance on a whim, the symbolism becomes diluted and your friends will be less inclined to make frequent purchases for these items. They will seek out new status symbols.


While the number of goods might be limited, the quality is not. If you have more disposable income, you are just as likely to spend it on a better car, a better house, a better laptop, a better phone, etc. Higher quality goods require more complicated manufacturing, more resources, more workers, and longer supply chains. All of which employ more people.

I'm not sure the quantity of goods is limited either. Looking at a supermarket today, the diversity of goods for so many niche purposes is incredible. And the internet has increased it an order of magnitude more.


These high quality goods require more sophisticated automation, not more workers. Unless you expect a future of hand made items.


> But there aren't a finite number of factories.

There absolutely is a finite number of factories.

There's probably even a finite, though perhaps quite large, limit on the number of factories that can exist (at least, within Earth's future light cone.)


There's a finite demand for goods too. I don't have unlimited room to fill my house with crap, and if I buy more advanced tools and things that replace a multitude of tools, my total demand will go down.

It may be a generational thing, but I just don't see people owning or wanting to own as much stuff as the generation before. A desk full of organization tools like a rolodex, card holder, pencils and notebooks just doesn't exist anymore.


In a similar vein desks are now covered in speakers, USB drives, monitors, laptops etc which all have a lifecycle just as the Rolodex and card holder became obsolete.

These items are also harder to produce and have, at least in my eyes, shorter product life


Speaker technology (analog) interface has not really changed since 1930 or so.

Monitors are newer, but you still see analog VGA ports and in TV, composite connectors.

It is the new digital interfaces that face obsolescence.


Whereas service jobs seem more finite.

Not sure I agree. At the moment, I'm buying all the goods I reasonably want. Sure I might want to replace some of my cheap goods with expensive goods or some of my old goods new goods, but on the whole I don't really want to consume more goods.

On the other hand, I can easily think of dozens of services I would either start consuming, or would consume a lot more of, if they existed at an acceptable convenience and price point. The problem, as I can tell from my phrasing, is creating service jobs at a salary level that people can live on.


    there aren't a finite number of factories
Please reconsider the absolutely absurdity of this statement.


Factories do not scale as well as service because they need are limited by natural resources. Service can literally be created out of thin air. For example, an AI could create an infinite number of movies or books or insurance contract. A factory making widget will be limited by availability of raw material.

They both share the same limitation at the end of the day. At the end, the human being is relatively static. You can sell widget and services that free more of his time, and then you can sell widget and services that occupy that free time, maybe at a stretch you can sell him something to free the time occupied by other stuff he bought, but there is a limit at 24 hours attention span per human.


Until we get that Holy Grail of general AI, services are the exact opposite of scalable. Even then, most services will need to be replaced by AI and hardware, which will depend of manufacturing scalability. A single factory can be big enough to mass produce enough widgets for every person in the world but that can't be done with lawyers, restaurants, barbershops, retail stores, or driving instructors until we have advanced robotics, AI, teleportation, virtual reality, etc. at which point it's just software and manufacturing. Just look at how the manufacturing sector output has grown over the decades despite a static labor pool while the service sector employment expands linearly with its size.

More importantly, manufactured goods can be exported much more easily to a growing global consumer base than services (other than software) that are almost always limited locally or regionally.


>Service can literally be created out of thin air.

Not really. It's built on manufacturing base. You need to 'service' something.


Lots of service are personal services (the thing you are servicing is the customer), and categories of personal service expand and contract with, essentially, fashion. Service can literally be created out of thin air.


Personal trainers, nail artists, psychotherapists, tour guides, social media consultants, maids, window cleaners, YouTubers, Mariachi bands, pet groomers, translators, golf instructors...


This is actually directed at the sibling comment from Houshalter:

I'm pretty sure that people who aren't members of the "rich upper classes" do make use of most of those services. To take just one as an example, nail salons are actually more common in the poorer parts of town in most cities I've been in.


And who is going to pay for those services? All those services are for the rich upper classes that can afford them. Your servant can't afford her own servant.


They reach saturation in a local area quickly and tend to burn out quickly. They also tend these days to not even be year-round work.

Fireworks booths, Halloween shops, frozen yogurt franchises, "escape game" franchises, "curves" gyms targeted towards women, edible fruit arranged like flowers...a lot of service jobs have very short shelf lives, and can really only have one or two in a town.


It's really weird that you think there's an infinite demand for goods, but not an infinite demand for people to stock those goods on shelves.

Anyway, a 'service economy' doesn't mean unskilled drones working in back-of-house. It means having a substantial professional class.


Human desires are more infinite though. We all want a bigger house, faster car, cooler phone, a masseuse appointment every week, etc.


I experience an increasing renaissance of undemandingness.


Not necessarily... 'course I'm well over 40 and my kids have moved out. FWIW, my kids don't much seem to want these things, either.


That study is bullshit. It's probably more the opposite - ~15% job losses caused by automation and 85% caused by trade policy.

You only have to look at their opinions on "right to work" laws to see whose side they're batting for (not employees).

Automation is simply being used as a scapegoat and a political justification for keeping trade policies that export jobs in place.

>Manufacturing has a powerful political resonance,

Manufacturing ecosystems take decades to fully destroy and decades to fully rebuild. The flow of goods on container ships can be halted overnight - which has happened before and will happen again.

There's a country that begins with Z and a country that begins with V that enacted policies that deliberately sabotaged their local industrial and agricultural base and assumed they could always just import what they needed. Spoiler alert: it didn't end well for either of them.


> That study is bullshit. It's probably more the opposite

You need to back up statements like this. Contradicting actual evidence with figures pulled from your ass isn't going to fly here.


This is a great article.

The rage of the blue-collar masses is misplaced. It belongs with engineers, STEM people, operations research, Taylorist management. Globalism isn't the architect of their fate. We are.

Want enough work to go around? Ban the last 100 years of agricultural development. That'll create all the jobs you could possibly want, real fast.

Except then you'all find out that more work to go around is a wrong thing to want.


The rage may be misplaced, but the rage is still valid. There is basically skilled jobs and minimum wage jobs. You are saying "they're misinformed" but they are not actually incorrect. So what do you suggest we do instead of focusing on manufacturing jobs?

(I would love to suggest something, unfortunately, I have zero ideas, and not sure where to get any ideas, frankly.)


This is my favourite counter to millenials complaining about how booomers had jobs handed to them on a platter. "What, you want an unfulfilling factory job doing the same mundane thing day in, day out, probably on your feet, and probably without climate control? And if you're a woman, explicitly get paid less for it?"

The boomers may have had a higher employment rate, but they weren't design consultants and business analysts and so forth.


I've done both blue-collar, shitty industrial jobs and white-collar cushy programming jobs. If they both paid the same, I'd be very tempted to take the blue-collar job. There's something very fulfilling about working with your hands and producing something tangible. As bad as turning wrenches or pumping a grease gun can be, days of endless meetings with obtuse stakeholders or perpetual yak-shaving aren't any better.


Bodies break down faster than minds. Ceterus paribus an office worker will have a longer career than a factory worker because their mind will still be sharp when the factory worker has arthritis.


Oh, and overtime. Sweet, sweet overtime...


Strangely enough, I've heard a few people say they would have preferred a job where they do the same thing day in and day out without much variation. They say it'd be nice to not have to think about what to do when working or what not.

And for a lot of people on the autistic spectrum, a factory production line type job might actually be somewhat enjoyable and well tailored for their strengths. Doesn't require any creativity, few communication skills are required, doing the same thing for long periods of time is rewarded...


American elites are intentionally trying to drive a wedge between boomers and millenials in order to disenfranchise both demographics.

This manifests as whingy articles in the mainstream media which leads to whingy people who enjoy both agreeing and disagreeing with them.


The only way this line of argument would make any sense would be if first world countries such as Germany (which manages to keep well paid manufacturing jobs at home) didn't, well...exist.


Manufacturing has a history of high growth and employment. Services do not. Economically, service domination means an overall slow-growth economy. Even highly intellectual services do not come close to the historic growth / employment curve the nation enjoyed when it was dominated by manufacturing. Wealth distribution is also heavily-weighted toward to the top with services. Generally democracies fare better when wealth is more broadly-held.


Good points. However, the macroeconomic benefits of manufacturing don't necessarily require people to be employed in manufacturing, do they? If America builds enough productive, highly-automated factories, the country is still generating wealth. As long as some of this wealth is captured for the people, then standard of living can increase.


> However, the macroeconomic benefits of manufacturing don't necessarily require people to be employed in manufacturing, do they?

"Macroeconomic benefits" as usually measured by aggregate output measures, clearly not.

Distributional benefits, OTOH... well, not a strong requirement. But...

> As long as some of this wealth is captured for the people, then standard of living can increase.

The challenge is establishing the mechanism for that capture outside of employment. A fairly fundamental premise of the existing economic system is that the prime manner of that capture to provide distributed benefits will be employment, and there is fairly strong resistance (including from the people who would retain the benefits in the absence of employment without some knew capture mechanism) to changes to the structure.


That resistance is strong, but not universally or globally. It's not the kind of social innovation likely to come from America. But that doesn't mean it's a doomed prospect at the outset.


If I am an American, then, the prospect is likely doomed. And likely doomed for my daughter, too, who has had a terrifically difficult time with her post-college life even though both her parents are college educated and gainfully employed.


>Good points. However, the macroeconomic benefits of manufacturing don't necessarily require people to be employed in manufacturing, do they?

Pretty much. The stuff you buy from China wasn't shipped 3000 miles because they have better robots than us.


Not sure why this is being down-voted: it's pretty well established that service economies have limited potential to export or achieve economies of scale, and thus unable to benefit from expanding global trade.


The plus side of service economies is that they're a lot harder to outsource - you can't open a Manilla call-center to handle a nursing home.


If your local hospital doesn't have a vastly disproportionate number of nurses from the Philippines, it is... atypical.


And they pay taxes, buy things from local businesses, pay rent to local landlords, etc. Quite unlike foreign call centers. Great news all around.


You can bring in h1b nurses for half pay.


That's not how that system works


It doesn't matter how it's supposed to work. If it produces the wrong results then that's how it works in reality. After all if it's not working how it's supposed to work why not change it? If nobody is going to fix it that means the true intention was to produce that "wrong" result in the first place.

H1Bs are bound to the employer and a transfer costs $1k - $3k in legal fees. There's even an optional premium fee to ensure that it will be processed within two weeks instead of two to six months. Sure the new employer may cover this but it's obviously going to be priced in the salary.

Such a system pressures the employee to stick with their current employer even though it may be a suboptimal choice.


Have you been to a nursing home lately? I see a lot of nurses that are fresh in the country. Not sure if h1b or work visa or what. There is definitely some shady things going on around foreign nurses in nursing homes.


The holy grail for politicians is growth in jobs that pay well but don't require college degrees or a ton of specialized training. Manufacturing provided those jobs for decades.

That's why they are obsessed with manufacturing. If someone could come up with another industry that does the same thing for unskilled workers, then politicians would back that just as hard.

The sad part is that manufacturing itself no longer pays unskilled workers well. People blame China but it's arguable that automation and machines have taken more jobs.

This is why free college for everyone in the U.S. is a good idea. Our economy is leveling up, and it's time to level up our education too.


>jobs that pay well but don't require college degrees or a ton of specialized training.

This is my thinking as well because this demographic is most likely a swing voter. College educated white collar types most likely have a lifelong party affiliation and don't swing their vote, but this demographic often doesn't as they aren't typically political.

Its easier to blame cheap manufacturing overseas than to admit that our own homegrown automation is to blame here. Everyone pretending automation isn't eating the world is something every politician and every party world-wide seems to have in common, at least or now.

Lastly, there's a puritan ethic at work here. Manufacturing, as well as farming, is hard work that brings tangible and easy to understand results. Politicians can talk about those jobs and farmers with no controversy compared to praising a hedge fund manager or an investment group that created vast amounts of wealth and jobs. Its politically incorrect to praise the wealthier people in society, even though they're the ones responsible for much of the economy. Election season tends to bring out the myth that the economy is run by hard working men in overalls sweating to produce value, when its really run in swanky offices by people engaging in fairly technical disciples.

One of the big problems with democracy or at least the demagogy needed to win an election is that you often can't talk about how things really work as its seen as too elitist, technical, or just confusing. So certain classes of people are seen a virtuous like teachers, farmers, or line workers and anything having to do with big business or finance is instantly vilified. So we have these elaborate lies and strange incentives (fight for manufacturing? why?) to make sure no one gets offended or feels inferior.


The memory is that these old factory/manufacturing jobs were high paying (middle class), secure, and accessible to people of low intellect, minimal education, and limited social grace.

The proposed replacements "caregivers, retail workers and customer-service representatives" are significantly lower wage and also require more "EQ" that the working man of the prior generation didn't need. The voters these politicians are addressing are working from a memory of a time when "men were men", that worked hard in a physical way to produce a physical product; in the memory, these working men didn't think and didn't emote, they produced.

Now, the voter says, men have been "feminized" by being forced out of a productive, provider role where a single income could support the family. Instead, they are placed into a role where they need to express concern, care, and use soft skills instead of physical strength.

And when they want the same pay and security they had before, they are instead told to "learn to code" (or learn whatever, get an education). Which is easy for a coastal educated person to say, but to a line of family men who have not just eschewed education but actively resisted it, this is a tough pill to swallow.


You make some good points but I think you go a little off the rails with the social commentary.

The truth is that wages a worker can earn are bounded at the top by how much value they add. If they are paid more than the value they create they'll be fired (unless they're executives).

A manufacturing line can produce millions of dollars of value with a few dozen workers. This means if the workers organize properly and if they're not undermined by foreign competition then they can potentially capture a lot of value and have high incomes.

The "service" jobs that are replacing them add much less value. A caregiver can only work with one person at a time, and maybe six or eight in a workday. That guarantees the job will be low wage or not done at all.

Our economy used to produce jobs by the tens of millions where an average guy with average ability and a willingness to endure hard work and monotony could buy a house, raise a family, go on the annual vacation to Niagara Falls or the Grand Canyon, have his wife work as much or as little as she wants and eventually retire comfortably. The economy doesn't produce these jobs anymore.

Now we have jobs that are still well compensated but comparatively small in number and highly specialized or jobs that are not and can not provide wages to live the lives people used to have.


I think the upper bound on manufacturing jobs would be the cost of automation.


Automation isn't the enemy of manufacturing these days as much as decentralized manufacturing is.

Once 3D printing evolves to the point of being suitable to print everyday items it would kill a lot of jobs all across the supply chain the manufacturing industry.


>> Once 3D printing evolves to the point of being suitable to print everyday items

That won't happen any time soon. Sure, you can print household items like a cup, plate, and possibly silverware but so many household things are made out of materials that aren't really 'printable' (a pillow or couch for example) or complicated devices with components (headphones, a can of air freshener, a laptop), manufacturing plays a role in all of those items.


These items being 3D printable are considerably closer than you think.

We can actually 3D print a pillow now since we already have printers that can 3D print with memory foam. https://3dprintingindustry.com/news/now-can-3d-print-memory-...

The current high end generation of printers use a combination of lithographic/ultrasound and chemical based process control can produce rigid and flexible materials from the same substrate. e.g. http://carbon3d.com/

And we can print already circuit boards as well as embed wires and conductors in the 3D printing process, we can also 3D print basic components like resistors and capacitors. http://www.kurzweilai.net/3d-printing-basic-electronic-compo...

If you think this ain't happening any time soon, we either have a very different definition of soon or you don't really understand just how far 3D printing and additive manufacturing in general has progressed over the past 5 years alone.

We are considerably closer today to the day where when you need a new pair of headphones you simply walk to a kiosk than to the days when low-skilled labor manufacturing was a major part of western industry.

While this isn't going to be done within 2 years, within a decade it is going to be possible, especially considering that additive manufacturing is already being used by local shops and major companies are pushing for this in order to simplify their supply chain.

The car companies are a very good example of this, Audi and a few others have been investing heavily in additive manufacturing of replacement parts in order to be able to grant their authorized dealers and repair shops the ability to 3D print many parts in house. This means that car companies do not need to continue to manufacture replacement parts for decades and keep old tooling a live or to outsource manufacturing to 3rd parties in order to keep their cars running, this also cuts down the cost of shipping and inventory management considerably.

Many other businesses/industries also are expanding into similar techniques with plumbing, electrical work and HVAC systems being prime candidates and being actively piloted in the field, need a 4" Y connector? simply go to your truck and print one....


The reality is there is still plenty of hard, material stuff that needs to be made.

Just look at SpaceX. It's cool, it's tech and it is most certainly hard material science.

We won't be able to make it with just soft skills and software. Improving our material lives (including not wasting resources) matters.


Hard material science is light years from manufacturing jobs.


While true, aerospace is still probably one of the best skilled labor/manufacturing jobs available. There are quite a few regulations and certifications that need to be followed/held which makes it more difficult/costly to outsource.

In the case of SpaceX or similar companies that fall under ITAR or do classified work, meeting those security requirements is an additional hurdle to outsourcing, although automation will still have an impact.


> actively resisted it

Honest question. Is this a reality or a degrading stereotype?


It's very much a common reality among working-class families of nearly any ethnic background in the USA.

I have plenty of friends and some non-intermediate family members that have reported that their friends and family actively discouraged continuing their education after highschool for one reason or another. In some cases, reasons like "you'll earn more working an honest trade", and "college debt is a scam" are given (in some cases, these may actually be true). In others, things like "do you think you're better than the rest of us?", "that's for white people", and "only f-gs and liberals go to college" are hurled at those that want to continue their education.

And in many cases, it doesn't even take active discouragement to prevent people from wanting to obtain any higher education. I have relatives that live in very small, rural farming towns that have actively resisted attending anything other than the local 2-year junior college, in part because the people that get 4-year degrees never come back to town. They're convinced that they would be betraying their family and friends by getting educated and finding a better living situation.


My anecdotes are the opposite. Usually the parents had a job they hated (manufacturing or service sector), and encouraged their kids to attend college.


I grew up poor. My father paints houses. He always used to tell me: "Work smarter, not harder."

My roommate hired him to refinish his deck (He owns the house), and every time my father showed up for work and I was working from home, he was thrilled.

My mother is barely literate, never really attended high school. She always read to me, encouraged me to read, and always made money available to buy books. The only things she cared about was me taking education seriously and not saddling myself down with kids too young (which might have backfired because neither I, or my brothers, have any interest in having children, which makes her sad).

I guess I'm just saying: Have another anecdote to add to your collection. But I'd also say, don't think the GP is wrong. Both attitudes exist obviously.


According to this poll [1], only 6% of Americans see college education as "not too important", and the rest see it as at least "fairly important". If there are people actively resisting education, they are a rather tiny minority.

1: http://www.gallup.com/poll/166490/americans-college-educatio...


The entire comment is an absurd stereotype, and about what you'd expect to find in this forum. Manufacturing jobs weren't (and aren't) filled with a bunch of meatheads coloring by numbers any more than are construction jobs.


>Manufacturing jobs weren't (and aren't) filled with a bunch of meatheads coloring by numbers any more than are construction jobs.

This is true, but the fact that there are definitely stigmas around higher education in underprivileged and working class communities in the USA is very much a reality.


You're absolutely right that this stigma exists and needs to be challenged but I would add that in my experience one, although certainly not the only, reason for this stigma is that many working class people don't feel that the more educated classes have much respect for the kind of labor they do. I think US society in general views a lot of working class jobs as rather undignified and the stigma against education in these communities is in part an unfortunate reaction to that.


>about what you'd expect to find in this forum

I disagree, you find a diverse set of viewpoints on HN, this isn't representative. The fact that a distillation of r/theredpill dogma is the top comment is upsetting to me, but then again, I have come to expect that when the number of comments exceeds the number of upvotes on a story, such stories are more of a lightning rod of politicizing than it is substantial conversation.

Eventually the up/down votes equalizes it out. There are a couple of interesting comments below this that shock discuss the content of the article and probably will take this comment's place.


I'm sorry you're upset. I regret my original comment, and trying to remove it, today I found out HN doesn't let users delete comments older than a certain small amount of time.


The implication that "coastal" people value education more is also a crude stereotype.


Yes, it is real. I'm from a small town in Montana with a strong timber industry presence, and loads of people stick around, largely because their parents want them to stay or because they don't want to leave everything they know. Often times, there's no choice because the kids didn't do well enough to go to "coastal school," nor could they or their parents afford it if they did.

People from cities exhibit this kind of behavior too, but for some reason no one talks about it as negatively as they talk about staying in your shitty rural town after high school.


>> and loads of people stick around, largely because their parents want them to stay or because they don't want to leave everything they know.

We've really fallen as Americans, too eager to stick in one place. 2-3 generations ago many of our ancestors left everything they had in their home country to come here with nothing more than the money in their pockets and shirt on their back.


Those Americans often suffered from homesickness so bad that it was possible to die from it:

https://en.wikipedia.org/wiki/Nostalgia#As_a_medical_conditi...

Homesickness: An American History by Susan J Matt is a great book about how it existed in America. The song "Home Sweet Home" is banal to us, but was forbidden to be played during the Civil War because it caused homesickness and desertions.They used to hospitalize people suffering from nostalgia. It could be that bad. the past was nothing like the modern rootlessness we have now.


True. Not saying it's good, just providing some pathology.


Kids on the coast can inherit their families now $1m house... Meanwhile those that move are forced to save and save and maybe get lucky to buy a house.


It is probably more stereotype than not. But there is some truth to it: I do know an anecdote of someone who was effectively disowned for daring to go to college. That case is almost certainly on the extreme side of the spectrum, but I wouldn't be quick to discount the fact that some places are actively hostile to the idea of higher education.


It's certainly a generalization, and I think its fair (if recursive) to caution that every generalization is an overgeneralization.

But as far as the "reality" goes, there are certainly personal anecdotes to support it, some about people I personally know.


Definitely a stereotype.


I certainly saw this in school in the late 70'sin the UK


>Which is easy for a coastal educated person to say, but to a line of family men who have not just eschewed education but actively resisted it, this is a tough pill to swallow.

I don't think it's so much a cultural thing as the high intellectual capabilities required for high paying knowledge jobs. Coding, for example, is just too hard for a huge segment of the population, regardless of how much training they get. If you really want to Make America Great Again, you need to make these jobs easier and accessible to more people, thus paying less but employing more. Easier said than done of course.

Within software, Haskell is the wrong direction. I haven't used it, but it seems like Go aims to make coding simpler. But it's not just programming languages; it includes large scale system design, which currently needs to be reinvented with intense effort at every firm, even repeatedly within the same firm, even within the same product.


"I don't think it's so much a cultural thing as the high intellectual capabilities required for high paying knowledge jobs. Coding, for example, is just too hard for a huge segment of the population, regardless of how much training they get."

Maybe but it doesn't matter that much. If some breakthrough in education made it easy for 60% of the population to become good quality coders, it would lower the wages of existing programmers, somewhat increase the pool of working programmers but not give that 60% good jobs.

The type of coding done at Uber, for example, is specifically valuable because it replaces the lower paid labor of other people. We can't all have jobs automating each other out of jobs, now can we?


I work on developer tools, with the explicit long-term goal to automate developers out of their job, and we need all hands we can get :)


1) Developer tools don't really eliminate jobs, not any time soon, not in way a robot can entirely eliminate a line welder position or a self-driving car could eliminate a taxi driver position.

2) Sure, you need all the hands you can get in the current market. Still, you wouldn't hire a ten thousand new developers tomorrow even if ten thousand people as competent as your most competent lead developers showed up on your doorstep tomorrow.


The current market is precisely that there's so much low-hanging fruit in automating a developer job that we aren't going to entirely eliminate developer jobs any time soon; and hence why any new pair of hands helps.

The tech companies in SV told the Obama administration that if they gave a million more H1Bs to engineers, they'd hire them all. And plenty of them put resources on improving developer tools.


TIL that the React ecosystem is a conspiracy against the poor.


You realise that something can have bad outcomes for a given group without anyone intentionally seeking those outcomes, yes?


Yes, it was a joke.


It's interesting really. Systems that give you more flexibility and power might make good engineers more productive, while making many more mediocre engineers less productive. Of course, the former largely drive these innovations.

I've been out of web dev for a while now, but React's one way state to UI concept actually seems like an amazing simplification.


>> you need to make these jobs easier and accessible to more people, thus paying less but employing more.

Wouldn't a greater number of coders with lower abilities not work very well? Today's 10x programmers would become 20x or 50x


Not sure which coastal school gave you the social grace to act like this...


"Coastal educated"? Nice stereotyping there.


Andy Grove spent the last decade or so of his life crusading about this. He framed the problem as, Silicon Valley invests a great deal in creating innovation, but outsources the scaling of it. Even though that may be in the short term best interests of the companies doing the outsourcing, both they and the country lose out on the economic growth, jobs, and crucial institutional knowledge that scaling innovations brings. And the knowledge transfer to other countries better enables them to continue building on the original innovation, developing their own capacity for original innovation.

https://en.wikipedia.org/wiki/Andrew_Grove#Preference_for_a_...


Good point. I don't think that every country in the world should be aiming to run an export-manufacturing trade surplus; that's mathematically guaranteed to end in tears. I do worry about institutional capability loss on the scale of companies, industries, and whole countries. Look how hard, over-budget, and over-schedule it has been to resume building nuclear reactors in the USA after the entire country took a decades-long break from new unit construction. There was too much knowledge lost from aging humans' heads before it could be passed on to the next generation on the job, and now it's very expensive to regenerate.


Export mercantilism seems to result in the middle income trap. Even Japan never caught up. I would prefer not to have that kind of economy. Research and innovation yields the highest margins.


>Why Are Politicians So Obsessed with Manufacturing?

Because when the shit comes to shove and the global economy takes a nosedive or your previous friendly third world manufactures give you the finger, having a "service industry" is worth nothing, but being able to produce the actual shit your businesses design and sell/export, matters.

Of course for the US this might be less so, because they can always force, by diplomacy or might, those developing world manufacturers to comply.

Another question would be why are people like the author of the article not particularly hot for manufacturing?

Because they are upper middle class pundits, have worked all their lives in the culture/media/academic etc industries, and could not care less for lost manufacturing jobs and other such stuff.

That's how we get books about the world being flat, industry doesn't matter, it's all "information" and "creativity" now, from people that could not suffer a day without electricity (and the hard work that goes into producing it), or without their car, etc.


"Service industry" includes financial services, which have been hugely lucrative to the West.

It's a globally integrated supply chain, and cannot be otherwise. There is no way countries are going back to a blast-furnace-to-car vertically integrated manufacturing world. It costs far too much and you couldn't even do it back when Ford tried it. He needed to import rubber, modern cars need to import chips.

The only non-globalised manufacturing chain is defence, which is instead prohibitively expensive.

Manufacturing is popular because it's percieved as a source of blue-collar jobs. Not only has that declined due to automation, but I think that one of the reasons for the decline in Western manufacturing in the first place was union-busting and labour relations issues. Part of the reason Germany has retained its manufacturing reputation is avoiding that failure mode.


>"Service industry" includes financial services, which have been hugely lucrative to the West.

For whom?

>It's a globally integrated supply chain, and cannot be otherwise. There is no way countries are going back to a blast-furnace-to-car vertically integrated manufacturing world.

The most competitive manufacturing though is "blast-furnace-to-car vertically integrated", just not within the same factory (which it wasn't even in Ford's time as you said) but within the same country. That's why China is so much better at it, because it has the whole manufacturing supply chain next door to the final assembly line. Of course you need materials (rubber, metals, oil, etc) but that's something different and at a lower level than manufacture.


For whom is manufacturing lucrative? The capital owners. Isn't that why we had all those labour disputes and replacement of labour with capital? As others have been pointing out this is mentioned in the article: "Because of automation, there are far fewer jobs in factories. But the value of stuff made in America reached a record high in the first quarter of 2016".

Is China better, or just cheaper, due to starting from a low wage baseline in a blank slate with few environmental or worker protections?

Is it just an advantage from not having yet depleted its natural resources? The UK steel industry was built near iron and coal mines, almost all of which are now closed.


China is better. They have a rich, Shenzen style ecosystem for all kinds of manufacturing. They are not perceived as better because of the cultural distance and because of deliberate obfuscation on the part of marketing departments.

The US still has a lead in things that are heavily automated and meant for domestic consumption, and in super design intensive things- machines with engines, maybe Intel's fabs.


> "Service industry" includes financial services, which have been hugely lucrative to the West.

If you buy into the philosophy that it is something other than an elaborate global Ponzi scheme.


Ol' Marx saw capitalism as a 3 way standoff between workers, industrial capitalists, and financial capitalists. And he lamented that while the industrial capitalists would in the long run be better off siding with the workers, they would invariably side with financial capitalists until it was too late.


Why not go a little further and call it a structured asset-backed Ponzi scheme? It sounds more daunting, novelty and official.


> The only non-globalised manufacturing chain is defence, which is instead prohibitively expensive.

It actually is globalised. Things may be assembled in the US, but many components are imported from France, UK, Germany, Taiwan, etc.

> Manufacturing is popular because it's perceived as a source of blue-collar jobs

Totally agree. I would add that in the case of Germany, the manufacturing of industrial machines is very different in nature and volume from that of consumer products, etc.


In addition to this I'm willing to bet that a population largely engaged in the service industry, which doesn't produce anything is a discontented society prone to revolution. I feel that this is at least part of what is happening in the UK and the US at the moment.

People are disconnected by a lack of jobs that they want to do, jobs that provide tangible value, and need to blame that on something. So generally go with immigration, because it's a problem they can (try) and do something about and it must be that the immigrants who took the jobs.

Truth is the country as a whole decided that they'd outsource those dirty manufacturing jobs to a lower class in another timezone. Without really considering what value they'd provide now that they don't actually make anything anymore.

The country goes into decline, no longer producing anything of value, trying to suck money out of the marketing, economic and other forms of lockin they put in place (many of which would be called "service industries). Slowly, the countries actually doing the manufacturing wake up to the fact that they don't actually need that stuff.


From the article:

The value of stuff made in America reached a record high in the first quarter of 2016, even after adjusting for inflation.

It's not that the U.S. doesn't make things anymore, it's that there aren't endless jobs in making things.


There are. If there weren't those jobs wouldn't exist in other countries.


Of course, manufacturing capability is important for a nation from a strategic viewpoint. But even if the manufacturing returns to the country - the fact of the matter, is that those manufacturing jobs are never coming back. It will all be done by robots. This process is already well underway(https://www.ft.com/content/7eaffc5a-289c-11e6-8b18-91555f2f4...)

So those politicians speaking to old people in steel towns are misleading them and giving them false hope. Bringing manufacturing back isn't going to do much to reduce unemployment . That seems to be the point of the article.


I’m finding this robots argument a bit tiresome. Seems more of an excuse to justify outsourcing than the inevitable end state. If for every 10 workers, instead of 9 losing their jobs and 1 managing the robots, couldn’t we have 10 managing the robots and 10 times more stuff. The latter seems the more likely outcome to me of free markets, but instead we seem to have pivoted into a micro-managed (FED, ZIRP) government supported vulture market focused on profit extraction (outsourcing, stock buybacks, tax avoidance, etc.).


There is no distinction between "free market" and "profit extraction". There's no easy way to "10 times more stuff" either: not just natural resource limits but demand limits. People aren't going to buy 10 times more stuff without 10 times as much credit. Or vastly increased wages / basic income.

(There's an aside in Huxley's 'Brave new world' about new sports being invented with elaborate equipment requirements simply to soak up surplus manufacturing capacity)


I could have worded it better: short term profit extraction at the expense of long term capital expenditures and growth through mechanisms such as stock buybacks and outsourcing. [1] Agree there is no easy way to 10 times more stuff but neither is everybody instantly replaced by robots and if everything is 10 times cheaper due to increases in productivity (robots) then more credit / increased wages isn’t required. I do believe the robots arguments is used in a fait accompli way that isn’t necessarily true. [2]

1. http://www.marketfolly.com/2016/05/stan-druckenmillers-sohn-... 2. https://www.brookings.edu/blog/the-avenue/2015/04/29/dont-bl...


The global economy did just take a nosedive, and the modern U.S. economy handled it just fine.

> your previous friendly third world manufactures give you the finger

Countries are not kids on a playground. If a country's economy does a lot of trade with the U.S., cutting off that trade is the last thing they are going to want to do, especially in the midst of a downturn.

Think the government of Venezuela has liked the U.S. over the past 2 decades? But they haven't disliked us enough to stop selling us their oil, or buying our planes and construction equipment.

And, of course, the U.S. today remains one of the top manufacturers in the world. To the extent we are growing services, it is on top of manufacturing, not displacing it.

That said, manufacturing jobs have disappeared--and that's why politicians are obsessed with it. Because they get elected by people who want good jobs, and no one has yet discovered a new industry that will pay millions of high school graduates enough to buy a car and a single-family home, the way manufacturing used to.


> Because when the shit comes to shove and the global economy takes a nosedive or your previous friendly third world manufactures give you the finger, having a "service industry" is worth nothing, but being able to produce the actual shit your businesses design and sell/export, matters.

But the article even points out that these jobs are not being moved overseas, they are being automated away. Thus, it will be an American manufacture giving you the finger.

> but being able to produce the actual shit your businesses design and sell/export, matters.

Good thing we are producing more "shit" than ever before in history.

> From an economic perspective, however, there can be no revival of American manufacturing, because there has been no collapse. Because of automation, there are far fewer jobs in factories. But the value of stuff made in America reached a record high in the first quarter of 2016, even after adjusting for inflation. The present moment, in other words, is the most productive in the nation’s history.


For a relatively angry-toned comment, I feel you hit the nail on the head.


If you or the OP had actually read the article, you'd know that isn't the case:

From an economic perspective, however, there can be no revival of American manufacturing, because there has been no collapse. Because of automation, there are far fewer jobs in factories. But the value of stuff made in America reached a record high in the first quarter of 2016, even after adjusting for inflation. The present moment, in other words, is the most productive in the nation’s history.


I'm not sure there is such a disconnect as you suggest. While value has increased, I might posit that the value is due to the fact that the US focuses on the value-added side of the equation. So if the US produces cars, it doesn't produce the Daihatsus or the Fiats of the world. They focus on $40K cars. It took me moving to Japan to realise that you can buy a perfectly good car for under $10K.

If the bottom falls out, the US may find that there are no customers for their comparative luxury goods and no US citizen willing to work for little enough to be competitive with anything else.

I am, of course, an random guy on the internet and my observations are worth slightly less than that, so who knows ;-)


The votes that can turn the tide in this election are those in the rust belt. Manufacturing is the key word that gets their attention. I believe that's why. All other reasons are secondary. It was about the financial crisis in 2008 and Bain Capital in 2012 which ended up affecting manufacturing jobs.


yep, politicians say what their voters like to hear (and do what their donors want to be done :). For example California politicians don't talk about manufacturing, instead they talk education, environment/climate change, security, minorities rights, some talk agriculture, etc... some even talk UFO/aliens (if you didn't read the official CA booklet listing candidates and their statements for this year race for the US Senate Barbara Boxer's seat you missed a lot of fun :)


I wasn't aware of these facts:

--[T]here can be no revival of American manufacturing, because there has been no collapse. Because of automation, there are far fewer jobs in factories. But the value of stuff made in America reached a record high in the first quarter of 2016, even after adjusting for inflation.

--[T]here were 64,000 steelworkers in America last year, and 820,000 home health aides.... Soon, we will be living in the United States of Home Health Aides, yet the candidates keep talking about steelworkers.

Given the opportunity, I think I'd vote for McKinsey, Bain, or BCG to manage the executive branch instead of our current Presidential candidates.


Here's the US table of employment by category.[1] (I keep mentioning this table in discussions of employment.) 14% of the workforce makes all the stuff. That's manufacturing, mining, construction, and agriculture. 14%. US manufacturing employment peaked in 1979. Manufacturing output is at peak now.

That 14% number was about 50% in 1950, and maybe 90% in 1900. That's how much things have changed.

As for imports, China's government has decided that it is going to reduce its imports from the rest of the world. This is part of the "China 2025" program announced by Li Keqiang in 2015.[2] The US may have to reduce its imports from China to keep up. At most, though, this will add a few percent to manufacturing employment.

[1] http://www.bls.gov/emp/ep_table_201.htm [2] http://www.globaltimes.cn/content/922394.shtml


Manufacturing employment can't be 90% in 1900--agricultural employment certainly would have dominated. The 50% of 1950 also seems high.

According to <https://www.minnpost.com/macro-micro-minnesota/2012/02/histo..., manufacturing employment peaked at about 35% in 1950s. In 1900, it was around 25%, with services about 33% and the rest in agriculture. That graph has services employment always outpacing manufacturing (which meshes with my knowledge of US history) and manufacturing only outpacing agriculture around the 1910s, 1920s (which also meshes with my knowledge of US history--agriculture was very labor intensive prior to mechanization).


I meant agriculture, mining, construction, and manufacturing - the making of physical stuff. All that is only about 14% today. Not sure what the Minn Post's definition of "industry" is.

(Correct MinnPost link: https://www.minnpost.com/macro-micro-minnesota/2012/02/histo...)


That was basically Mitt Romney's whole pitch.


> I think I'd vote for McKinsey, Bain, or BCG to manage the executive branch instead of our current Presidential candidates

Why not just give them whatever money they ask for and be done with it?


This is true for most companies that hire those consulting companies as well.


>According to the Bureau of Labor Statistics, there were 64,000 steelworkers in America last year, and 820,000 home health aides — more than double the population of Pittsburgh. Next year, there will be fewer steelworkers and still more home health aides, as baby boomers fade into old age. Soon, we will be living in the United States of Home Health Aides, yet the candidates keep talking about steelworkers.

I'm picking up a sort of 'gamers are dead' vibe from all this. I wonder if the media considers Gamergate a sort of success story and template for future political discourse? The argument would be that the issues faced by outgroup demographic X are not real, because outgroup demographic X is dying anyway, and is being replaced by ingroup demographic Y, and is also full of misogynists and/or racists and/or basement dwellers and/or rednecks and/or Trump voters.

As supporting evidence, I will note the author just casually slipped in there that steel workers are all white men while service workers are mostly women.


Politicians are amateurs. I don't mean that in a pejorative way. Politicians are experts at politics, they can achieve consensus in seemingly impossible circumstances. If you pick a random politician, and ask them to design a transmission, or perform open heart surgery, they'd do as poorly as you or me. Yes, there are politicians from all walks of life, and you can probably find a surgeon politician. In general, the thing they're really good at is politics.

It sucks because they're called on to provide solutions to deep problems, with only the skills of enthusiastic amateurs. Manufacturing solved a lot of problems. It's completely reasonable for an amateur to look at history for past solutions to current problems.

For reference, the us congress has a panel of 700 or so experts in all sorts of fields to help write policy. This is in addition to each congresspersons's staff. There's something on the order of 2000 people available to write legislation. And about 10000 pieces of legislation written. So each potential law gets a few months of effort.

It boils down to a congressperson (probably a lawyer), a few enthusiastic political scientists, and a few economists to shape national policy.

It's not that they don't produce good work. They're smart hardworking people. A trillion dollar budget is probably as difficult to produce as a decent compiler. That's the kind of thing we'll see congress try to slap together right after the election. It's not much different than a team of undergrads trying to get their compiler to pass test cases.

It's not inherently bad, it's that sometimes problems are really hard, and they should probably be handled by experts. We don't have a good way of collectively picking experts, so we pick amateurs and hope for the best.


Contrast a politician with a juror. There's no real reason for a juror to focus on anything but the case at hand. They don't have a career as a juror to pursue, yet they're expected to learn about things relevant to the case. There's almost no personal incentives involved (which also happens to be heavily policed) besides scheduling.

Now, a politician generally does things to further their political career. They don't research solutions, they're lobbied for them. They do research what they can say to get themselves [re-]elected. They make deals based on their their status and trajectory within their political party, maybe tempered by "the right thing" depending on how much they hold the concept of a public servant. Sure, there's some out there with passion for a particular problem, but that's not the common case behavior.

I say term limits on everything. Eliminate career politicians.

Huge bills are currently put together without one hand knowing what the other is doing, and in practice things like budget are fudged anyway to keep the machine mostly moving.

If career politicians with no real-world knowledge of the represented issues can do this stuff, then a random scattering of people with greater expected slices of real-world experience and fewer expected strings attached can do the same.


Vaguely related, It would be really interesting to see a government try juries for legislation.

Let representatives do everything they normally do but vote. A jury selected from voters in proportion to representatives is convened. The bill sponsors and opponents make their case to the jury. The jury votes.

It might be an unmitigated disaster. But, it would be interesting.


This is how democracy worked in ancient Athens: https://en.wikipedia.org/wiki/Sortition


TIL there's a word for that strange political idea that I like very much. Thanks!


>Vaguely related, It would be really interesting to see a government try juries for legislation.

That -- random selection -- was the original, and more advanced than ours, conception of democracy. Not for all posts, mind you.


California has not had particularly good results with term limits for congresscritters. The usual explanation is that it empowers lobbyists, who have continuity and expertise. I don't know if it is true, but it's worth considering.


Governments employ experts in myriad capacities. Some of these experts achieved their position through actual merit rather than successful politicking.

I think many politicians, despite appearances, actually listen to these expert advisers. It takes a generalist to integrate information from disparate domains of expertise and make a decision. It takes a political expert to establish public support for the decision and shepherd it through various levels of government.

This represents an idealized picture of government, of course, and may not correspond with the reality in any particular country.


I agree, but there's an inherent dilution.

It's not hard to imagine and expert proposing something really innovative, that slowly turns into "more manufacturing jobs". Each step dilutes an idea down to something that both sides can understand. The final step is generalists convincing other generalists, politicking. Maybe good parts stick, maybe not.

I have frustrations. Things work ok, i guess. I don't have a grand alternative.


> I don't have a grand alternative.

Me neither. It would be better if all sides trusted experts more, but that seems to be the opposite direction from where we're heading. Denouncing experts seems to be a wellspring of political capital these days.


>and they should probably be handled by experts

That experiment was tried in Soviet Union. How did that end?


A few things.

First, shoe factories not having enough leather to make quota responding by making tiny shoes is one of the most cunning gaming of metrics i've ever heard of. I think that was brilliant. People in insane situations still have great ideas.

Second, I reread my post a couple of times. I missed the collective ownership point. Could you quote the line where i said the workers should control the means of production?

Third, the US military is getting tanks they don't want. This is pretty obviously dumb, and a clear example of politicians ignoring experts.

Finally, no real deep changes are needed. Look at the EU's handling of toxic materials. If something is super toxic, but not really used by anyone, the regulation is pretty light. If something is slightly toxic and popular, the regulation is light. The dangerous popular stuff is heavily regulated. It's the kind of thoughtful, risk aware policy that's pretty rare in the US.


We shouldn't be so sure that "the US military is getting tanks they don't want". It might be true, but the words of people in a military chain of command are controlled from the top. Generals who contradict the president soon find themselves in trouble.


Just because something ended badly one place doesn't mean the idea was bad. We have "expert" witnesses, some of whom have very little expertise. That's bad. Being corrupt and getting 'experts' in office or firing 'experts' if they don't provide a politically correct answer? Bad.

But it is a lot harder for me to argue that basing healthcare or even health and safety policies on the advice of physicians and scientists is bad. If we are revamping the tax code, it might do us well both to look at how tax code compliance is in different countries at different rates - and also talk to psychiatrists and psycologists to help set it up in a way that gets the most compliance. Talk to poverty experts to see what tax codes could hurt the poor and work on ways to solve that.


>Politicians are amateurs.

That's what's great about them, because they are there to represent us, and we're all, in most fields other than ours, amateurs.

And also because most experts on economy and industry have private interests to take care off and force upon the rest.

(Well, those private interests also buy politicians, yes, but they always start by buying or directly employing experts).


How do we fix this?

Here's an idea - direct democracy where one can only vote on a topic that he/she has proven a minimal set of competence in. This could be in the form of an exam on a topic (eg. economics) and/or logic test. The goal is that one should not be allowed to vote on something like climate change without knowing the science and data behind climate change.

We need to acknowledge that the world is too complex for one person to know what's best for everyone on every single topic. Our system of representatives is totally outdated now that we have the internet.

The beauty of direct democracy is that it removes the politicians. As long as there are politicians, there will always be corruption (eg. bribery).

Ideally of course we'd have AI deciding our best course of action because humans are inherently biased, but that's further down the road.


Corruption is one of those things that probably isn't going away any time soon: It isn't just a plague on politicians, but other areas of life as well. Businesses, etc.

And unfortunately, you have to have someone produce those voting tests. How do you think they will get their positions? Do you think that the tests in states such as Utah will have the same sort of things as tests in California or Vermont? In your version of the system, the politicians have simply changed professions.

Besides, there is actual need for politicians at this point (the AI still seems pretty far out). It is good to have someone to organize large infrastructure projects, good to have folks handle money and dividing it up, overseeing military operations - and it is good to have folks outside some of the industries asking questions and learning and trying different solutions.

Corruption itself won't go away any time soon: The best we've been able to do is minimize it.


I'm not saying that every decision must be handled by the entire voting populace, just that we need to embrace a more issue-focused mindset and acknowledge that the world is too complex for one person to know what's best on every policy stance.

The test should be on the federal level (knowledge is universal), and wouldn't be designed by politicians. The tests should be very very basic and test a minimal level of understanding. For example you should be able to explain what the Fed does if you were voting on an issue pertaining to monetary policy. The questions would be as objective as possible.

Yes we may still need politicians, but again the main idea is that we seek to have people only working on matters they're qualified for rather than some jack of all trades who's supposed to have the country's answers on everything. Military operations would be handled by military personnel, housing policy would be designed by experts in housing policy, energy and climate change issues would be designed by experts in those fields, foreign policy would be dictated by foreign policy experts, etc.

Could this new system be a slippery slope? Are there other problems? Of course. But our current system is failing - just look at the presidential "debates", they're a complete laughingstock. We need to try to figure out how to improve this broken system rather than keep perpetuating the status quo.

I'd love to hear your ideas on how we could improve things.


This is an extremely naive view. The sort of direct democracy you propose will most likely end up systematically discriminating against various groups.

>As long as there are politicians, there will always be corruption

Corruption is unlikely to go away with politicians, my guess is that it'll be there as long as human nature stays the same.

>Ideally of course we'd have AI deciding our best course of action because humans are inherently biased

AI can be as biased as the training data you feed it.


What's your solution?

I'm not claiming that this idea isn't without its flaws. Our current system is just such an inefficient laughingstock that we need to be seeking to improve it.

Of course corruption will most likely persist under any system. The goal is to minimize it. The purpose of my proposal would be to make us make more informed policy decisions and incentive society and the media to focus on the issues.


> one should not be allowed to vote on something like climate change without knowing the science and data behind climate change

Okay, so in states where the majority don't believe in climate change and evolution, you'll have them design tests to exclude voters who believe in evolution/climate change from voting?

> This could be in the form of an exam on a topic (eg. economics) and/or logic test

We already have a long history of stifling voting rights: https://en.wikipedia.org/wiki/Voting_rights_in_the_United_St...

Some that stood out:

* Poll tax prevented the poor from voting * At one point, religious tests prevented non-christians from voting * Literacy tests prevented blacks from voting


The tests should be as objective and unbiased as possible. Yes one can never remove 100% of bias, that doesn't mean we shouldn't do anything at all.

Remember, the whole point is to only have people qualified on a topic voting on said topic.

So if you're voting on, say, the minimum wage, you should be familiar with the economic ramifications of it. You should be familiar with both the arguments and counter-arguments, and perhaps the general consensus of economists.

If you're voting on trade policy, you should know the economic ramifications of a tariff. You should probably know the history of our positions on trade as well.

If you're voting on some issue related to the national debt, you should know the difference between a country's debt and household debt. You should probably also know the role of the Fed as well and how it relates to this.

The tests should be on a federal level because knowledge is universal. I'm really surprised that you and the other commenter implied that these tests would be on a state basis, and am curious as to what made you guys think that.

> We already have a long history of stifling voting rights

Poll taxes and religious tests are totally irrelevant. Literacy tests are sort of comparable to what I'm proposing, but I wouldn't advocate literacy tests because I don't care if you can't speak English if you know what you're talking about. Again, the main idea is that only people qualified on a specific issue should be voting on said issue.

Or maybe I should propose it from this angle - we should institute direct democracy instead of our current republic system due to the reasons I outlined in my original post. Direct democracy however has some glaring flaws (mainly that most people are too stupid and emotional), and the solution I propose seeks to rectify the glaring problem with direct democracy.


> knowledge is universal

But it isn't... take your example on economy. In the last hundred years people tried out all sorts of things with the guidance of experts, from market economies, planned ones like communism, globalism, and now economists are shifting their thinking on that too. The chances that we're right about all that today are pretty slim too. In 10, 20 years economic thought will have shifted elsewhere. That's a mere 2-4 election cycles.

> If you're voting on trade policy, you should know the economic ramifications of a tariff. You should probably know the history of our positions on trade as well.

Isn't that why we have a representative democracy? And even those who govern look to advisors for these things anyways. I don't need to be micromanaging the government.

> So if you're voting on, say, the minimum wage, you should be familiar with the economic ramifications of it.

Does anyone know the economic ramifications with adjusting minimum wage? Seriously. We just did this in Seattle and there were experts arguing that it would destroy all the businesses in the area. That didn't actually happen: https://www.washingtonpost.com/posteverything/wp/2016/08/10/...

Turns out, people disagree about all sorts of things. Usually it helps to look at what people have to gain or lose. In the minimum wage case, business owners didn't want to raise their expenses. In your case, the more people you exclude from voting who disagree with you, the better chance your policy preferences come into play.

I'm not saying we shouldn't try to understand the choices we make through our voting decisions, but knowledge tests as a means to reduce.. "idiot voters" is just another way to exclude people who disagree with you from voting.


Our representative democracy is failing because the people in charge aren't the ones most qualified to answer all these questions - because jack of all trade politicians are tasked with deciding on all matters instead of experts in their respective fields.

I'm simply arguing that we need to break out of the status quo, and throwing out suggestions on how to fix this. Direct democracy is one way to bring the power back to the people. A competency test to accompany it is a stricter one to alleviate the pitfalls of direct democracy.

Even if we never adopt a competency test, I'd still argue that direct democracy would be a massive improvement to what we have now - if only because it'd bring the focus of the debate on the policy issues rather than on the scandals of politicians. It would totally obsolete are ridiculous two-party system.

Like I said, the test would seek to be as objective as possible. Questions would not be of the subjective format: "Does increasing the minimum wage improve the economy?" Actually I don't even think there would be any questions specific to minimum wage. Better questions would pertain to indisputable fact-based questions (eg. what's going on in the middle east in regards to foreign policy questions about that topic). Or again we could just default to basic logic tests.

These are all just implementation details though and secondary to the main point - which is to improve our policy-making.


> what's going on in the middle east in regards to foreign policy questions about that topic

Also not a great example of something we understand. I think realistically you would not be able to test on something so practical since most of these things are so poorly understood. Logic tests may be the safest thing you could test, though at that point you would just be cutting everyone off below a certain SAT score.

If I were in charge of coming up with a test, it wouldn't be a logic test, but some sort of test against hubris: to see how much they can admit that they don't know or can't know. In my opinion politicians play the "I know everything vote for me" game and load up on untested theories, leading to poor results (interventionist foreign policy leading to terrorism, stock market crashes, maybe even deep ocean drilling, etc).

But I also recognize that while I believe that excluding overconfident people (the ones who don't know what they don't know) from office would lead to better outcomes, I also suspect that this could turn out terribly.


The problem then is it gives too much power to few people. Especially in the case of AI.


That's already are problem - power is concentrated in too few people (politicians) that are bought out by special interests.

My direct democracy proposal expands that power to more people. You would have the power to vote on issues you're qualified to vote on rather than be beholden to your jack-of-all-trades representative who isn't the most qualified person to be making every decision.


I'd say the core skill of politicians is to get elected.

Writing good laws is not entirely unimportant, but it is a much smaller factor. And, as you say, they have experts to help out with that stuff.


> I'd say the core skill of politicians is to get elected.

In the US, this could easily be mitigated with shorter campaign cycles.


If you banned campaigning, you'd get a shadow campaign from surrogates.


I work at a steelworks in Australia. The economic conditions are not identical to America but a lot of the same pain exists.

Australia also has worse Anti-dumping protections then the US. China is dumping steel (i.e selling below cost) into our market - see: http://www.abc.net.au/news/2016-09-28/china-trade-arrangemen...

The government deciding to build a submarine fleet 'in Australia' was a huge election issue. The local unions around here are campaigning on forcing state government to use 'local' steel as a condition of their tender process for infrastructure projects. I think they have a point somewhat, it is pretty absurd that they built a sports stadium about 2km up the road from our huge steel plant and imported all the Steel for it.

I don't think there is an easy answer. Throwing the industry the odd submarine or two to supply material for isn't long term sustainable. However If it is enough to kick-start a ship building industry though who knows...


Are any specialty steels (tool steels, etc.) made in Australia, or do we just make low carbon structural steel and a little alloy steel?

When I call up steel suppliers and ask if they have any maraging steel, they just laugh at me.


The technical capability is there but my understanding is the sales volume is not present for speciality grades to be profitable.

It is basically an economy of scale problem unless you make specialised grades in large amounts (thousands of Tonnes) it is not economical. The market for that volume is not there.


This is why: https://en.m.wikipedia.org/wiki/Three-sector_theory

The Great Depression saw the "creative destruction" of farm labor. People migrated to cities and it took a long time for the economy to shift to manyfacturing.

Manufacturing jobs disappeared more gradually, but are now gone due to automation and outsourcing.

The only way they will come back is to robots.

The next sector is IP, it's one of the USA's biggest exports -- movies, music, ideas, brands, etc. Designed in California, assembled in China. That's why the USA has such a strong IP lobby and negotiates international treaties and bullies guys like Kin Dotcom.

What's left after that? Well, why do we all NEED jobs? Because currently wages is the primary mechanism of getting money to the masses. But demand for human labor is falling.


From an earlier comment, but this is why:

"For every $1.00 spent in manufacturing, another $1.81 is added to the economy. That is the highest multiplier effect of any economic sector. In addition, for every one worker in manufacturing, there are another four employees hired elsewhere. (Source: NAM calculations using IMPLAN.) - See more at: http://www.nam.org/Newsroom/Top-20-Facts-About-Manufacturing...

http://www.nam.org/Newsroom/Top-20-Facts-About-Manufacturing...


That's interesting. Would it be correct to say that $1 spent on importing goods to the US would still generate the additional 81 cents of additional value in that country?

And if that's the case, would we still get the 81 cents in additional value if, due to global competition, we were able to import those same goods at 50 cents?

Or am I overthinking this?


Is there some dystopian novel where the majority of workers spend their time taking CAPTCHAs? I almost expect it to happen, as a way to keep the masses occupied in a way that's difficult to automate.


That will either be automated, or those workers job would actually be doing that to train the AI that will solve the captcha.


I figured they were just suckers for factory tours, or at least photos ops with the "working man".

Also, a lot of the Left longs for the days of big factories and big union collective bargaining that could raise the wages a lot of people quickly. It's a great thing to point to with good economies of scale. Globalization has made this a mostly untenable strategy, but the longing remains.



They're not, but the demographic they need to appeal to is, and it's not clear how to sell people on capitalism in an age of diminishing labor requirements. Capitalism as we know it is almost over; there is no rational reason for people to starve while a tiny minority accumulates all the capital. History tells us that once enough people figure out that they've got no prospects they'll gang up on the elite, kill them, and attempt to redistribute the spoils.

I'm not being hyperbolic, I expect western-style democracy to collapse within the next 10-20 years.


Maybe because they're catering to a vote bank that was most affected by manufacturing / factory jobs that went overseas? And there's little else those voters could relate to other than someone bringing back the jobs that they know well. There's also the righting the wrong thing that's appealing to many.

As TFA points out there is little chance of revival of American manufacturing. TFA makes a very good point that most of those who lost their factory jobs have moved to service industry and that's what the candidates should focus on making better.


Because this is the work people who didn't go to college or uni can do and make a "middle class income" with a little vocational training (no real maths needed).

Same as why the mittelstand is so important.


Here, for instance, is a graph of manufacturing jobs per capita in the US:

https://www.numer.al/us_bls_data/figures/manufacturing-emplo...

It’s quite clear that manufacturing jobs have just been slowly and steadily disappearing over the past 70+ years.

Viewed at this scale, the debate over the bump in the last 6 years seems totally silly. Moreover it’s hard to imagine a policy that would turn that kind of trend around.


It is very easy to zoom out an fit a line but the step like changes at certain points are interesting. Averaging over the variations might throw away a lot of interesting information.

But you are right about one thing, the curve has not dipped up appreciably in the last 30 years. All I see are steps, plateau's where the level is kept before the next drop.

EDIT: can't do math or I keep thinking it's 2000's still.


Agreed that it'd be interesting to try to figure out what explains those cycles and steps. Recessions in general? Would be interesting to see what correlated with those points in time.


At least in the last 40 years of that graph, recessions seems to be it.

A recession hits, some people get fired (sticky wages, etc, etc), the recovery comes and it's cheaper to automate stuff than hire people. Then things coast for a while. The cost of automation keeps falling, people keep getting relatively more expensive, but in good times generally you don't get people getting fired en masse because times are good and the employer is making a profit anyway. Then a recession comes, and the cycle repeats...


In the 19th Century a lot of people were "physiocrats" - people for whom all progress had to relate somehow to the agricultural production of food. This was most stridently expressed in the denial of ( some ) patents to Cyrus McCormick for the combine harvester.

Manufacturing ended that, especially "factory farming".

So now, the logistics and communications revolutions are doing to manufacturing what manufacturing did to agriculture.

It's the circle of life...


Why can't I buy a toaster made in the USA, even if it is off a highly automated line? Because it's still cheaper to make in manually in China.

Even if it's automated, it will still be cheaper to automate it in China.


Does this help? http://www.b4usa.com/tag/toaster/

I've bought quite a few things made in the USA (or other countries with decent worker and environmental protections, like Italy, Germany, Japan...) that other people seem to usually get from China. Anecdotally, I've noticed that people who will talk about how Grandma's toaster or washing machine lasted forever and it's a shame you can't buy something like that today are not willing to budget for it like Grandma did. Grandma spent a lot of money on her appliances in 1950, whether you want to adjust by consumer price index or just look at (e.g.) the ratio of minimum wage to sticker price. Are you willing to spend thousands of dollars on a washing machine, to match relative buying power and prices from the middle of the 20th century? If so, you can still find appliances that are built like a tank, built by workers paid decent wages, built in factories that don't just dump all their trash into the nearest river. But if you want to buy a toaster that lasts a long time, is made in the USA, and costs only a little bit more than the Chinese toaster, yeah, I agree that is hard to find. There is good stuff still available at the high end. The low end has gone a lot lower.


Yeah, on the other hand prices really have dropped much more than quality. I'm ten years strong on a toaster I picked up from Target for (and I can remember this, for some reason) $12.


Interesting that when I was living in China, I could not buy there things manufactured in China!!

I had to go to US or Europe in order to buy them and them move again to China with it because most factories directly export what they manufacture.

Automating something in the US or Europe is probably cheaper than in China because of the educated people there is much better prepared than in China.

The huge difference is in basic commodities cost. China is so huge and dense(great basic markets) but with great fluvial communications(cheap transport), cheap energy from coal, and growing immensely.

Most of the US is sparsely populated by comparison. The industry hubs are not as enormous as in China.


Depends on the product. Some products could be automatically created in the US, then sold with "Made in the USA" on them, boosting their appeal.



Because millions of people have been affected. This means votes. If you can promise some bullshit and they buy it, you got votes. Lots of them.

Contrary to popular belief, politicians only care about their own enrichment and careers. They couldn't give one iota about the needs of the people. They want votes. They'll say anything they have to say to get them. They'll do anything they have to do to get them. And one in office they'll do nothing for the people who voted for them. This is true world wide and it isn't any different in the US.


Because the numbers show that every dollar of manufacturing investment in an area produces $7.


How much do other types of investment produce?


Apparently I had my numbers wrong. Here's better info:

http://www.nam.org/Newsroom/Top-20-Facts-About-Manufacturing...

"For every $1.00 spent in manufacturing, another $1.81 is added to the economy. That is the highest multiplier effect of any economic sector. In addition, for every one worker in manufacturing, there are another four employees hired elsewhere. (Source: NAM calculations using IMPLAN.) - See more at: http://www.nam.org/Newsroom/Top-20-Facts-About-Manufacturing...


Manufacturing represents middle class jobs that have largely gone away thanks to globalization, outsourcing, and automation among other things. One of the reasons the Boomers were so rich compared to following generations was that it was easy to get one of those jobs with minimal education, a college degree was not a necessity to make a decent wage and buy a house, a car, etc.


Big factories can be retrofitted in times of world war to build tanks/guns/etc. It's seen as a national security thing.


This seems out of date. World War II is not going to be repeated. WW II could drag on as long as it did -- giving civilian-to-war conversions enough time to matter -- because there were no nuclear or precision guided weapons. If a no-holds-barred Total War breaks out between major world powers again, it's really hard to see how it would last long enough for factory conversions to be meaningful. And if it's just another big war of choice we're imagining in the future, like Americans fighting in Iraq or Vietnam, those haven't been bottlenecked by industrial capacity either.


Two more national security reasons:

1. There is the problem of depending on potential enemies (all others have potential to be enemies) for goods that are critical to the military and/or general economy. Suppliers can threaten to cut supplies. Note that this can happen even if actual shooting war is unlikely; the threat to cut supplies is a brutal negotiating tactic that can block us diplomatically. For example, if we depended on Russia, they could demand that we support the Syrian government.

2. Lots of physical things contain computer chips. He who builds them is in control. Remember when France gave the UK some secret codes to make Argentina's missiles (purchased from France) fail. It's not just military equipment. Consider your Ethernet card and/or motherboard chipset. It could include a hardware debugger with full memory access, controlled by magic packets. What happens when we can only get those from government-owned Chinese companies? What about modern computerized farm equipment that phones home for licensing? If that were foreign, could a foreign power disable our farm equipment at a key time, causing us to face food shortages?


I don't think the example in your second point is true. France did help the UK a lot but the Exocet missiles worked fine, one was even launched from the back of a truck.


Why are politicians so obsessed with farming and agriculture?

The reasons for both are not dissimilar.


Manufacturing jobs and service sector jobs are not mutually exclusive. Historical trends do not represent an evolving sophisticated economical stragety, but document economical needs met. The author suggests manufacturing jobs are irrelevant, but all jobs are relevant and necessary.


Having a good source of manufacturing jobs can float an order of magnitude more service jobs in an area. Look at every decaying mill town across the northeast where the mills went under and vibrant local downtown economies folded up afterwards.


Politicians like wearing hard-hats. Doing so at a software company looks weird - usually.


Manufacturing is a strategic asset. When/If war ever comes upon us again we will need such assets to preserve ourselves. We must not let hubris cause us to think we are above the ruin as other great peoples have suffered.


As other have pointed out, US manufacturing is at an all time high. It just doesn't require as many people these days.


There is a lot more dignity of work in manufacturing. You're not servicing some old person who can afford to have a home health aid--you're making a product for people to buy (including other people like you).


I can't understand. Helping a fellow human being who is too weak to care for herself is almost the definition of dignity to me. It may be dirty work, but there's nothing more important.

In contrast, the manufacturing job turns you into a pre-programmed cog in a big machine that consumes substantial amounts of natural resources to produce something that will most likely end up in the junk heap in a couple of years. Where's the dignity in that?


Dignity of work doesn't have anything to do with importance. It's about power relationships: vendors are in a different relationship with their customers than service workers are with the people they serve.

In Manhattan, a nanny probably makes more than a journalist--but is there any comparison in which job is more dignified?


What's undignified about a nanny's job?


As someone that works in manufacturing (on the ERP systems side), I assure you that the dignity non-unionized assembly line workers feel is about what you'd get from any highly repetitive $10 - $20 an hour job with scant pay raises. Having been around the assembly line, I'd definitely recommend someone try life as a barista or bartender or Costco employee before stepping foot in a factory.


It is weird how people who never worked on an assembly line go on and on about the desirability of manufacturing jobs.


Because employees of manufacturers have more power in the value chain than in most other jobs that employee high school graduates. This pushes up middle class wages without government intervention.


> From an economic perspective, however, there can be no revival of American manufacturing, because there has been no collapse. Because of automation, there are far fewer jobs in factories. But the value of stuff made in America reached a record high in the first quarter of 2016, even after adjusting for inflation. The present moment, in other words, is the most productive in the nation’s history.

Pay no attention to the top % - that reaps all that benefit of that automation, and widening the wealth disparity chasm - behind the curtain.


It's because Germany and Japan is so successful with manufacturing. Donald is asking why the US cant compete with Germany and Japan.


We outproduce both Japan and Germany combined in manufacturing. Manufacturing is roughly 18% of GDP for each Japan and Germany, but only 12% of the USA.

Germany GDP: ~$4 trillion.

Japan GDP: ~$5 trillion.

USA GDP: ~$17 trillion.

9 * 0.18 = 1.6

17 * 0.12 = 2.0

So, as usual, Mr. Trump's ignorance is causing him to ask the wrong questions.


Now lets divide by people. For people, it's 208 million and 321 million.

The USA is getting $6355/person from manufacturing.

Germany+Japan is getting $7792/person from manufacturing.

They beat us, earning an extra 22.6% per person from manufacturing.


I just saw this. Manufacturing is a much smaller segment of USA economy though, so per-capita is a bad metric.

Maybe it would be okay if you weighted it based on % of the economy, in which case the USA would be $6355 / 0.12 = $54,441 vs 7792 / 0.18 = $43,289.

So, weighted GPD per capita, the USA comes out way ahead. And actually, the weighted GDP/cap in manufacturing for the USA is higher than the average GPD/cap of the economy overall, which is just $53,041.


Yes, as the trade surplus so aptly shows. Oh, wait..


The USA could export everything it manufactures but still run a trade deficit because Americans spend too much money on French mobile games and Bollywood films.

But your original argument was that the US doesn't compete with Germany or Japan in manufacturing, when the facts show they not only compete, America fucking decimates those countries in raw output.


ironically, manufacturing is an industrial-age metaphor: people still seem to imagine that it can or could drive the economy, that election-quantity people might be supported by manufacturing, and that location of manufacturing is negotiable. all arguably untrue.

you can't brag about unicorns.


Because manufacturing creates true value opposed to digital fiat goods.


Manufacturing jobs are the only jobs who build base value, from which all the jobs derive. Service and retail will sooner or later collapse when there is nowhere to extract money from.


Want more service jobs? Make sure people have money to pay for services. This feels like a strong basis for UBI


After looking at Mr Appelbaums Linkedin entry I wondered why anyone would listen to his opinions about this as opposed to any one elses.



> Manufacturing was, logistically speaking, easier to organize. There were lots of workers at each factory, and most knew one another. Service work is more dispersed and done in smaller crews. Workers living in the same city and employed by the same retail chain, for example, would likely know only a handful of their compatriots. Fostering a sense of trust and shared purpose under these conditions is difficult.

Plus you can't just fire everyone and shut down the factory when they start talking union.


Automation? Oh is that how you see Foxconn employees? That would explain quite a bit...

Most of light and heavy manufacturing is done somewhere else. Electronics. Housewares. Clothing. Tools. Equipment. Cars. Materials, both raw and those undergoing technological processing. High tech. A service economy? That's nice - but there are only so many prostitutes, bank clerks and Mickey D employees required, so what is everyone else going to do? Navel gaze? Fill jails? Starve? More importantly, what are you going to offer the rest of the world in exchange for all that stuff you can't make anymore? Democracy? Or just bomb them? At some point even bombs will be hard to make, due to lack of necessary facilities, equipment, materials, knowledge and experience. Just see how well "resurrecting" last century's space knowledge has worked out for NASA.


> Automation? Oh is that how you see Foxconn employees? That would explain quite a bit...

Even if you "resurrect" manufacturing, automation means less people.

Quoting: http://www.bizjournals.com/pittsburgh/blog/innovation/2015/0...

"Perhaps most surprising about the HRPF was the relative lack of employees on the floor of the massive facility. While ATI employs about 2,500 throughout western Pennsylvania and eastern Ohio, the technology and automation of the HRPF only requires seven operators and nine maintenance employees per shift, making the operation safer and more efficient, according to Deluca."

That's not a recipe for a manufacturing job resurgence independently of whether you think that is good or bad.


Wow, cool facility. That is some automation.




Consider applying for YC's W25 batch! Applications are open till Nov 12.

Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: