Once you get far enough in ANY sport, you start considering tradeoffs between risking long term health and improving performance. If you are a competent adult, you can evaluate your drivers, consider risks.
But without fail, in ANY competitive sport, you realise that you have to risk health in order to achieve that next performance tier, there is no other way.
Once you get into that 1-10%(depending on sport) elite level, you realise that there is no way you can compete without PEDs.
I've participated in (taken myself) and have been a witness to this in weightlifting(olympic and strongman), soccer, cycling and swimming. Starting young. Real young.
Coaches of different sanity levels are trusted to make the right choices and not often questioned by busy or absent parents.
Everyone cheers on when medals are won and records are broken, without consideration for how it happens.
I personally had no idea I was taking hormone modifiers until about 16, it started at 11.
My coach just gave me what he said were vitamins and I never questioned it, he was the closest thing to a father I had, his authority was absolute.
At 16 I found myself in a hospital yellow as a banana on the brink of liver failure, that's when I found out.
Everyone on our team took what the coaches gave. Once a while we'd see a parent get into a shouting match with one of the coaches about something we didn't understand and that kid would never come back again.
Some of the guys I trained with went on to become highly recognisable names in their respective sports. One even has a supplement brand. Those I've kept in touch with continue PED use, that is the price of being at the top of the game.
Want to turn on your fancy seat vents? 3 taps on the large screen in the middle.
Want to change some temps/fan speed? Swipe(not as nice as iOS) right, look through 10 identical looking icons and arrows, to find the right one.
Honestly, I thought people were exaggerating how bad it was until I got to experience it for myself. As a long term fan of the brand, it’s utterly disappointing.
This AI is basically a search engine layer for the wix library of components.
It uses pre-defined colour palettes, with minor modifications.
I hope you’re right, but I don’t understand how, by design it’s not supposed to come up with completely new things (even though that’s what the marketing blurb says).
We all project/assume based on the bubble we live in.
In my 18 years of in-house software dev experience (several countries, companies of different sizes), not once have I even heard (in the real world, not online) of people using any sort of drugs like the ones mentioned in the article.
I'm not saying that you're wrong. But based on my personal experience, I also could bet the opposite of what you're saying and feel just as confident.
I know some people who take party drugs. I know alcoholics. But coworkers who routinely take performance enhancing drugs other than caffeine at work, not one.
I guess it depends on your environment. Silicon Valley seems particularly prone to it.
I picked up meditating daily in an attempt to address one of my mental disorders.
Falling asleep is much easier for me now, whereas I used to struggle with it a lot.
My thoughts used to feel unstoppable and the moment I would wake up in the middle of the night, they started going and I was wide awake and no longer sleepy within seconds.
Now it’s like I’m observing them, but no longer get excited. I still have bad days, it’s not a 100% consistent solution, but it’s helped me massively.
Their lack of support, or rather their "support fails" and their VP and C-suite level hacker news readers consistently offering personal assistance to high profile incidents on HN kind of made them a negative running gag here.
No. That’s still a lottery and you are basically saying I’m paying more, so I expect a better service. This does not guarantee results. At all.
What you want is a third party.
Someone who understands the trade and the codes and will check in on the building site daily and will make sure everything is being done correctly. And if it’s not, will stop work and put everyone in their place.
I frankly have no idea what the term for that is in America, but we call them freelance foremen where I’m from. Current going rate per month is roughly 1.5x minimum wage in my country.
May sound like a lot of money for someone just doing checking, but that’s only until you find out how expensive lack of oversight can be.
Ask around, many building companies offer these services, so company a builds the house, and an inspector from unrelated company b does the daily inspection. But ideally you’d find a one man band man, who’s really gonna be on your side.
That person is called a construction supervisor: someone hired by the owner who makes sure the contractor is doing good work and not ripping you off, as well as keeping the owner in line and making sure they don’t get in the contractor’s way, delay decisions etc.
Around here they aren’t interested in projects under $5M.
In some parts of the world, mine in Europe included, those guys are required by law and are usually employed by the municipality (but the construction project owners are charged for their services via a special fee).
They take on some personal responsibility for the way the construction project is handled (at least for the things that fall within their purview).
That sounds like building inspectors in the US. They vary widely in competence, but all will ensure the permit fees are paid and property taxes raised; most will ensure the work is done to code; approximately none will ensure the work is built to plan details.
That is annoying part - even if you could overspend and match salary for the guy - it still not guaranteed they will work for you. Mostly because anyone who is good is swamped with requests and can choose what they will work on.
I think Dvele (http://dvele.com) is one option in the US for this. I'd love to hear about others. They build in SD and ship in the lower 48 afaik. Would love to hear other options. Our budget to expand and my opinion of gc's after hearing an unending litany of horror stories are at the point that I'd be quite glad to pay a premium for a known, factory-made product.
I don't know, from experience Huf Haus is (while being very expensive) offering a level of quality (both in the construction and in the details/personalization) that I haven't seen in other EU firms, it is very possible that there are US firms at the same level, though from the little I have seen they are on par on the "other" EU ones (possibly good, but not exceptionally good).
If I recall correctly, Huf Haus is around since forever, before WW1, and they continuously evolved, their solutions are more than well tested, as "perfect" as they can be.
The great advantage of the "fully integrated pre-fab" (such as Huf House and similar) is that IF/WHEN the project is done, the result will be exactly what has been designed, the great disadvantage is that once the project has been approved, NO changes are possible (and again from experience it is a rare case that the customer/owner is capable of fully understand the project in all its details).
Back to the OP question the issue (generally speaking and in my experience) is about coordination of the various figures involved, typically here (EU, Italy) you will have several people:
1) land surveyor
2) architect (here the architect is more about design than building)
3) engineer (structural)
4) engineer (hydraulics)
5) engineer (electric)
6) general contractor or builder
7) various sub-contractors (electrician, plumber, etc.)
The common issue is that each of them (usually) have a somewhat "narrow" view, limited to their particular field, and often (please read as "always") they don't communicate properly among them and with the customer/owner.
The exception (as well usually) is, or should be, the general contractor, but an experienced enough one is unlikely to be available for a single house building or will dedicate to it too little time.
Mind you each of the figures I mentioned are in most cases very good at what they do, but, in the absence of someone who coordinates the project and execution, it is common that the result is not as good as it could be.
There are (were) people (shameless plug I am or was one of them) that while not specialists in anything have the experience and capability to coordinate these people and - also important - "translate" and "interpret" the desires of the customer/owner, the "project manager" and/or "site manager" that could be either paid by the general contractor or by the customer/owner.
Sometimes (not often) the architect (or the builder) has these capabilities, or is part of a largish firm that can provide such a resource for the project.
Since this has a cost, and building is generally a cost competitive field, this added cost is one of those that in recent years has been (generally speaking) either cut or reduced to the minimum (like giving - say - five or six building sites to the same person, which won't have the needed time to follow in detail each of them).
So, in a nutshell (and as always) it all depends on the people, you might be able to find a builder (usually small firms, almost familiar ones) that can do this or you might be able to find an architect studio (as well a smallish, but not too small one) that can provide you with this service, or maybe you can find and hire yourself such a manager/coordinator.
I agree with everything you said, this is why I think pre-fab is the way to go. It's like ordering a car, high industrial quality and few/no surprises. Other readers should keep in mind the pre-fabs we are talking have nothing to do with park homes. It's more like a Lego that is assembled onsite.
Regarding Huf Haus alternatives, there are a few German brands that are quite similar. Baufritz for instance is also old, and manufactures outstanding houses: https://www.baufritz.com/uk. The problem is that, unlike Huf Haus, they are not willing to do cheap (<€800k) projects. Huf can do smaller bungalows, which will be expensive per sqm but still less than a half out what Baufritz would be willing to consider.
For smaller stuff, in the UK there is https://wudl.co.uk, which builds pretty nice things. I also love https://www.echoliving.co.uk, although this is just a high-end cabin builder. Very different.
A good architect will be this third party and hold the GC's feet to the fire. The GC might not care about you and repeat business, but they will likely care a lot more about keeping a good architect & firm happier with a decent reputation. Plus, the architect is used to helping this process.
I thought architects are designers who are not experts on the technical details of things like constructions (strength, earthquake proofness, wind proofing), heating/cooling, humidity issues, electrical installation building codes, proper tubing, insulation materials, sound proofing etc.
That's the experience / knowledge I'd want to hire for oversight.
I don't see how a designer is the best person for that but then maybe my idea about architects mostly being desk-bound designers focused on estatics is totally wrong?
> maybe my idea about architects mostly being desk-bound designers focused on estatics is totally wrong?
Yep, it’s totally wrong. No doubt there are some architects/engineers who focus strictly on design. An architect/engineer is generally “in charge” of a construction project in the US, at least for commercial construction, which is the segment where most of the architects work.
I’m just a lowly subcontractor PM but the GC generally works for the architect/engineer.
Edit: New building projects will have multiple drawing sets: architectural, structural, civil, landscape, mechanical, electrical, plumbing, low voltage systems, fire protection, as well as others depending on the project specifics, but all of these engineers are coordinated by the architect.
Not all architects know. Source -- Am in month 21 of a construction project. Have caught more than a dozen mistakes made by both the architect and the GC's subcontractors.
But that's normal, there are varying degrees of competence in each trade. If someone asks who should they hire to develop a software solution, the answer is "a software company", even if there are software companies that develop awful software full of bugs.
Slightly sarcastic a bit, but isn't the point of all that engineering schooling, certification, titles, social prestige etc some kind of assurance that those people don't make mistakes? Or if they do, very slight ones? In a sense you cannot have it both ways right?
The idea behind is surely that, but it doesn't mean they can screw things anyway... the difference is that they will be accountable by law for it (which is an important difference, especially if compared to the world of THIS SOFTWARE IS PROVIDED "AS IS")
I guess in theory that would be true, but in practice (at least where I live), there is no accountability. So yes, doctors, lawyers, architects/engineers etc, get all the prestige and social status, without the downsides.
There was an exception though, like 10 years ago where the doctor was removing a patient's appendix and damaged major artheries. The poor patient lost the leg and the other one is not functioning well. They've sued privately (and had top lawyers) and after a very long process they've kind of won some meagre settlement. What was actually interesting was the fact that the major regional hospital never had a "doctor's error" in the last 20 years, only so called "complications" (which was "nobody's fault").
Doctors (and similar) don't get insurance against damages at all. Why would they?
You cannot state such things without specifying where you are. In some places (and/or industries or market segments, even), architects are 'just the design person', sometimes even not really doing technical design but just function and aesthetics. In others they are engineers who do (besides design) very hands-on oversight of all sorts of contractors.
I think statement like this need a country name to be included. I. Germany the architect is responsible to also manage contractors and that they do the right thing. The architect can however employ a 'Bauleiter', a foreman?
This is what a builder would do in North America, they're the general contractor and will generally budget for you, manage the project and the trades. They'll ensure quality and be your point of contact. Typically where I'm at they charge 15% of the total time and materials of the build.
My expectation is that the general contractor's attitude towards quality would be completely random. Some are gonna be great and some are gonna cut every corner they think they can hide from you. And then the buy side of the market isn't sophisticated enough for it to be easy to identify which is which.
And like for renovations, lots will bid the easy project and do it as fast as they can vs ensuring that anything that comes up is addressed well.
> Someone who understands the trade and the codes and will check in on the building site daily and will make sure everything is being done correctly. And if it’s not, will stop work and put everyone in their place. I frankly have no idea what the term for that is in America ...
My thinking was also to go with a reputable pre-fab house provider or a low-energy/emissions house.
I would hope that the higher requirements will set you up with a better builder. Not guaranteed though.
Pre-fab houses/ components do require more rigor for foundation etc.
The backend being rewritten in anything but PHP would have implications for hosting, so I highly doubt that given you're talking about a significant fraction of the web. It would also be a backwards incompatible upgrade.
You can have perfect dental hygiene and never use mouth wash in your life.
Just cause companies like selling you a product, doesn’t mean it’s good for you.